Your Cart
(empty)
0
Tradeport Electronics
measurement is our business
Cart : (empty)

GW Instek PSU 6-200 - 1200W Single Channel Programmable Switching DC Power Supply

1200W Single Channel Programmable Switching DC Power Supply

GW Instek

Rated 0 / 5 (0 reviews)

Category : Power Supplies

by quote only add to cart

Documents:
Datasheet

Overview
Features
Specifications
Calibration

The PSU-Series is a single output programmable switching DC power supply covering a power range up to 1520W. This Series of products include five models with the combination from 6V to 60V rated voltages. As th ePSU-series can be connected in series for maximum 2 units or in parallel for maximum 4 units, capacity of connecting multiple PSU-Series units for higher voltage or higher current output provides a broad coverage of applications.

The C.V / C.C priority selection of the PSU-Series is a very useful features for DUT protection. The conventional power supply normally operates under C.V mode when the power supply is turned on. This could bring a high inrush current to the capacitive load or current-intensive load at the power output on stage. Though the current becomes stable after the C.C mode is activated, the current spike occurred at the C.V and C.C crossover point may possibly damage the DUT. At the power output on stage, the PSU-Series is able to run under C.C priority to limit the current spike occurred at the threshold voltage and therefore protects DUT from the inrush current damage.

The OVP and OCP protections can prevent the DUT damage. Both OVP and OCP levels can be selected the range of 10% to 110%, with the default level set at 110%, of the rated voltage / current of the power supply. THe PSU-Series provides USB Host / Device , LAN, RS-232 with RS-485 and Analog Control Interfaces as standard. The LabView driver is available at the rear panel for external control of the power On/ Off and the external monitoring of the power output voltagre and current.

  • Voltage Rating:6V/12.5V/20V/40V/60V
  • Output Power Rating: 1200W~1520W
  • C.V / C.C Priority ; Particularly Suitable for the Batterey & LED industry
  • Adjustable Slew Rate
  • Series and Parallel operation (2 Units in Series or 4 units in parallel)
  • High Efficiency and High Power Density
  • 19 Inch Rack Mount Size Design
  • Stabdard Interface: LAN, RS-232 & RS-485, USB(Device / Host), Analog Control Interface
  • Optional Interface:GPIB, Analog Control Interface(Isolated Voltage Control), Analog Control Interface(Isolated Current Control)
Output Rating
Voltage 0~6V
Current 0~200A
Power 1200W
Output Ripple and Noise
CV p-p (10~20MHz) 60mV
CV rms (5Hz ~1MHz) 8mV
CC rms (5Hz~1MHz) 400mA
Load Regulation (Change from 10% to 90% of full load)
Voltage (0.01% of F.S. + 2mV) 2.6mV
Current (0.02% of F.S + 5mA) 45mA
Line Regulation (Change from 85 to 132 VAC input or 170-265 VAC)
Voltage(0.01% of F.S. + 2mV) 2.6mV
Current(0.01% of F.S. + 2mA) 22mA
Programming Accuracy
Voltage 0.05% + offset (mV) 3mV
Current 0.2% + offset(mA) 200mA
Measurement Accuracy
Voltage 0.1% + offset (mV) 6mV
Current 0.2% + offset (mA) 400mA
Load Transient Recover Time
Time 1.5ms
Output Response Time
Rise Time (No Load & Full Load) 80ms
Fall Time (No Load) 500ms
Fall Time (Full Load) 10ms
Programming / Measurement Resolution
Voltage 0.2mV
Current 6mA
Temperature Coefficient (after 30 minutes warm up)
Voltage 100ppm/˚C after 30 minutes warm up
Current 100ppm/˚C after 30 minutes warm up
Series and Parallel Operation
Parallel Operation Up to 4 Units Including Master Unit
Series Operation Up to 2 Units Including Master Unit
Environment Conditions
Environment Indoor use, installation category II (AC Input), polution degree 2
Operating Temperature Range 0˚C ~50˚C
Storage Temperature Range -25˚C~70˚C
Operating Humidity Range 20% to 85% RH
Storage Humidity Range Up to 90% or less relative humidity (no condensation)
AC Input
Normal Input 100VAC to 240VAC, 50Hz to 60Hz, single phase
Input Range 85VAC~265VAC
Power Factor (100VAC / 200VAC) 0.99 / 0.98
Maximum Input Current (100VAC / 200VAC) 21A / 11A
Inrush Current ≤ 50A
Efficiency (100VAC / 200VAC) 77% / 79%
Other
Analog Control (Non-Isolated) Yes
PC Remote Interface (standard) USB (Device / Host) RS-232 with RS-485 / LAN
(Optional) GPIB / Analog Control Interface (Isolated Voltage Control) / Analog Control Interface (Isolated Current Control; Note: Select one of the three
Cooling Fan Forced air cooling by internal fan
Dimensions & Weight 422.8 (W) x 43.6 (H) x 432.8 (D); Approx 8.7kg

Do you have a 1200W Single Channel Programmable Switching DC Power Supply that needs to be calibrated?

We offer standard traceable calibration and ISO 17025 accredited calibration services.

Get your 1200W Single Channel Programmable Switching DC Power Supply calibrated today! Click Here!

 

There are currently no reviews for this product.

 

Review the GW Instek PSU 6-200 - 1200W Single Channel Programmable Switching DC Power Supply

1200W Single Channel Programmable Switching DC Power Supply

Name :

Email :

Title :

Review: