GW Instek GPT-9801 - AC 200VA AC Withstanding Voltage Tester
A Solid Foundation for Reliable, Safe and Practical Safety Compliance Testing
GW Instek is launching to the market a new series of safety tester with high durability and multiple user-protection design. The GPT-9800 Series look to meet a variety of safety standards such as IEC, EN, UL, CSA, GB, JIS and other safety-related requirements for the safety tests of electronic products and components.
A total of 4 safety testers in the GPT-9800 Series, namely GPT-9804, GPT-9803, GPT-9802 and GPT-9801, are available for various applications. The GPT-9804 is a 4-in-1 model capable of performing AC withstanding, DC withstanding, insulation resistance and ground bond tests. The GPT-9803 is a 3-in-1 model capable of performing AC withstanding, DC withstanding as well as insulation resistance tests. The GPT-9802 is capable of performing both AC and DC withstanding tests, whereas the GPT-9801 is able to perform AC withstanding test. The series of safety tester is built upon a high-efficiency PWM amplifier platform with AC 200VA maximum output capacity to impede the influence from the voltage fluctuation of the input AC source. This ensures a stable voltage supply for all the tests of the GPT-9800 Series.
- 200VA AC Test Capacity
- 240x64 Ice Blue Dot matrix LCD
- Manual/Auto Mode
- Function Key for quick selecting
- High intensity flash for Caution & Status indication
- Safety INTERLOCK function
- Zero Crossing Turn-on Operation
- Controllable Ramp-up Time
- True RMS Current Measurement
- High resolution: 1uA for measuring current, 2V for setting voltage
- PWM amplifier to enhance the power efficiency and reliable testing
- Max. 100 memory block for test condition (step) setting. And each step can be named individually.
- Remote terminal on the front panel for “start” and “stop” control
- Interface : RS-232C, USB device, Signal I/O and GPIB (optional)
|
AC WITHSTANDING |
|
|
Output-Voltage Range |
0.100kV~ 5.000kV ac |
|
Output-Voltage Resolution |
2V/step |
|
Output-Voltage Accuracy |
± (1% of setting + 5V) [no load] |
|
Maximum Rated Load |
200 VA (5kV/40mA) |
|
Maximum Rated Current |
40mA (0.5kV< V ≦5kV) 10mA (0.1kV≦ V ≦0.5kV) |
|
Output-Voltage Waveform |
Sine wave |
|
Output-Voltage Frequency |
50 Hz / 60 Hz selectable |
|
Voltage Regulation |
± (1% of reading + 5V) [full load → no load] |
|
Voltmeter Accuracy |
± (1% of reading + 5V) |
|
Current Measurement Range |
0.001mA~40.0mA |
|
Current Best Resolution |
0.001mA / 0.01mA /0.1mA |
|
Current Measurement Accuracy |
±(1.5% of reading + 30uA) |
|
Window Comparator Method |
Yes |
|
ARC Detect |
Yes |
|
RAMP (Ramp-Up Time) |
0.1s~999.9s |
|
TIMER (Test Time) |
OFF, 0.5s~999.9s |
|
GND |
ON/OFF selectable |
|
DC WITHSTANDING (GPT-9804/9803/9802) |
|
|
Output-Voltage Range |
0.100kV~ 6.000kV dc |
|
Output-Voltage Resolution |
2V/step |
|
Output-Voltage Accuracy |
± (1% of setting + 5V) [no load] |
|
Maximum Rated Load |
50W (5kV/10mA) |
|
Maximum Rated Current |
10mA (0.5kV< V ≦6kV) 2mA (0.1kV≦ V ≦0.5kV) |
|
Voltage Regulation |
± (1% of reading + 5V) [full load → no load] |
|
Voltmeter Accuracy |
± (1% of reading + 5V) |
|
Current Measurement Range |
0.001mA~ 10.0mA |
|
Current Best Resolution |
0.001mA /0.01mA /0.1mA |
|
Current Measurement Accuracy |
±(1.5% of reading + 30uA) |
|
Window Comparator Method |
Yes |
|
ARC Detect |
Yes |
|
RAMP (Ramp-Up Time) |
0.1s~999.9s |
|
TIMER (Test Time) |
OFF, 0.5s~999.9s |
|
GND |
ON/OFF selectable |
|
INSULATION RESISTANCE (GPT-9804/9803) |
|
|
Output Voltage |
50V~1000V dc |
|
Output-Voltage Resolution |
50V/step |
|
Output-Voltage Accuracy |
± (1% of setting + 5V) |
|
1MW~ 9500MW |
|
|
Test Voltage |
50V≦ V <500V 1~50MΩ：±(5% of reading + 1 MΩ) 51~2000MΩ：±(10% of reading + 1 MΩ) |
|
500V≦ V ≦1000V 1~500MΩ：±(5% of reading + 1 MΩ) 501~9500MΩ：±(10% of reading + 1 MΩ) |
|
|
Window Comparator Method |
Yes |
|
RAMP (Ramp-Up Time) |
0.1s~999.9s |
|
TIMER (Test Time) |
1s~999.9s |
|
GND |
OFF (fixed) |
|
Ground Bond (GPT-9804) |
|
|
Output-Current |
03.00A~30.00A ac |
|
Output-Current Resolution |
0.01A |
|
Output-Current Accuracy |
3A≦I≦8A：±(1% of reading + 0.2A) 8A30A：±(1% of reading + 0.05A) |
|
Test-Voltage |
6Vac max (open circuit) |
|
Test-Voltage Frequency |
50Hz/60Hz selectable |
|
Resistance Measurement Range |
0.1mW~ 650.0mW |
|
Resistance Measurement Resolution |
0.1mW |
Do you have a AC 200VA AC Withstanding Voltage Tester that needs to be calibrated?
We offer standard traceable calibration and ISO 17025 accredited calibration services.
Get your AC 200VA AC Withstanding Voltage Tester calibrated today! Click Here!
There are currently no reviews for this product.
Recommended Accessories for the AC 200VA AC Withstanding Voltage Tester
Test Lead, U-type to Alligator Test Lead, Approx. 1000mm
GHT- HV Test Pistol
19" 4U Mounting Rack for for LCR800 & GPT/GPI-700A
