Time Electronics 7032 - Semi-Automatic Pressure Calibrator Module
A pneumatic pressure module designed to speed up routine calibration of pressure gauges, indicators and pressure transmitters. Features include a 4.5 digit LCD display with 5 selectable pressure units, zeroing switch, regulated output, and vent button. Best accuracy is 0.04% of range and a maximum display resolution is 0.005% of range. Line pressure is via the input port on the rear of the console with quick release connection.
The 7032 allows the generation of 4 precision pressures that can be adjusted individually by front panel mounted regulators. Typically a 5 point calibration at 0%, 25%, 50%, 75%, and 100% of full scale can be used. These pressures can be quickly switched to the front panel output port either manually or via remotely generated RS-232 commands.
Time Electronics EasyCal calibration software allows calibration procedures to provide the control signals required. If the 7032 is fitted in a bench with the 7051 bench control module the two RS-232 ports are internally connected to the 7051. EasyCal (installed as standard) then controls the regulator selection and can readback the displayed pressure output. With EasyCal procedures can be quickly created for a variety of pressure devices. Calibration results are automatically stored on the 7051, and can be printed on demand. Closed loop calibration of pressure transducers can be fully automated by implementing transmitter readback using the 7051's internal DMM.
The 7032 is an accurate and simple operation module suitable for rapid testing of pressure gauges, transmitters, transducers, and switches in process plants, offshore platforms, refineries, and many other on-site testing facilities.
- 2, 5, or 10bar versions
- Accuracy 0.04% of full scale
- Pneumatic with 4 regulators
- Pre-set 5 point calibration
- 4.5 digit display
- Up to 5 engineering units
- Control & readback via EasyCal
Technical Specifications
Pressure
| Range (bar) | 2 | 5 | 10 |
|---|---|---|---|
|
Accuracy (% of fs) |
0.04 |
0.04 |
0.04 |
|
Resolution (bar) |
.0001 |
0.001 |
0.001 |
| Temperature Stability | Less than 70ppm per °C |
|
Linearity |
0.02% of full scale |
| Units | bar, PSI, kPa, MPa, inWg, cmWg, inHg, mmHg, Kg/cm2, atm (5 units only, specify on order) |
|
Maximum Pressure |
2 x range |
|
Sensors |
4 x Piezo-resistive - stainless steel diaphragm |
| Over pressure warning | 1.2 x range full scale - audio and visual (on LCD) warning |
|
Fittings |
Quick Release |
| Rear Connection | Quick Release |
General Specifications
|
Display |
4.5 digit LCD |
|
Interfaces |
2 x RS-232. One for regulator control, one for readback (suitable for use with EasyCal and 7051 module) |
|
Module Width |
340mm (primary or secondary console fitting) |
|
Optional Extras |
7198 adaptors/fittings kit, EasyCal calibration software, and calibration certificates |
| Country of Origin | UK |
Do you have a Semi-Automatic Pressure Calibrator Module that needs to be calibrated?
We offer standard traceable calibration and ISO 17025 accredited calibration services.
Get your Semi-Automatic Pressure Calibrator Module calibrated today! Click Here!
There are currently no reviews for this product.
