Fluke PM6303A - PMA Automatic RCL Meter
The PM 6303A is the fast and simple way to get information about the value and electrical characteristics of any component. Just connect the component and read-out the value, the units and the equivalent circuit diagram from the large, backlit LCD display. This versatile meter gives you 9 specific parameter tests, with switchable dc bias for components that need it. At the push of a button you can select series or parallel resistance, capacitance, inductance, impedance, Q (quality) and D (dissipation) factors, and phase angle. Included with this PM6303A are both the radial component test fixture for front panel measurement and the surface mount component test tweezers. These two fixtures will allow you to test a wide range of components in and out of circuit. You can see from the photo that this unit is in excellent condition. The tweezers are still sealed in their original wrapper. The unit is shown displaying a E.S.I. 100 ohms resistor. You and can see that it performs flawlessly.
- 0.25% basic accuracy
- 2V dc internal bias
- Automatic zero trimming
- Front-panel test posts for immediate 4-wire measurements
| AC test mode | Test frequency: 1 kHz Test frequency accuracy: 0.025% Test signal level: 2V via 400W source Basic measurement accuracy: 0.25% ± 1 digit |
| DC bias | Internal: 2V |
| Maximum measurement ranges | Impedance/Resistance Z or RAC: 0.000W to 200 MW Capacitance C: 0.0 pF to 100 mF Inductance L: 0.0 mH to 32 kH Quality factor Q: 0.0002 to 500 Dissipation factor D: 0.002 to 500 Phase angle F: -90.0 to +90.0 deg |
| Maximum resolution | Impedance/Resistance Z or RAC: 01 mW Capacitance C: 0.1 pF Inductance L: 0.1 mH Quality factor Q: 0.001 Dissipation factor D: 0.001 Phase angle F: 0.1 deg |
| Circuit diagram | 7 different equivalent circuit diagrams |
| Auto mode | Read-out: Dominant parameter Equivalent circuit diagram: Parallel for R+C Serial for R+L |
| Manual Mode | Read-out: Dominant or secondary parameter Equivalent circuit diagram: Parallel or serial selectable |
| Measurement update rate | 2 measurements/s |
| Trim function | Open circuit: Open circuit compensation Z > 100 kW Short circuit: Short circuit compensation Z < 10W |
| Stored settings (non-volatile memory) | Front panel settings: 1 (trim figures included) |
| Calibration Interval | 1 year |
| Environmental Conditions | Operating temperature: 0°C to 50°C Storage temperature: -40°C to 70°C Power requirements: 100/120/220/240V ± 10% Line frequency: 50 to 100 Hz Power consumption: 16 VA Safety: According to CE-regulation 73/23 EN61010-1 CAT II, Pollution Degree 2 EMC: According to CE regulation 89/336: Emission according to EN 55011, Group 1 Class B, respectively CISPR 11. Immunity according to EN 50082-1, inclusive IEC 801-2, -3, -4 Warm-up time: 5 minutes |
| Dimensions and weight | W x H x D: 315 x 105 x 401 mm (12.4 in x 4.13 in x 15.9 in) Weight: 3.8 kg (8.4 lb) |
Do you have a PMA Automatic RCL Meter that needs to be calibrated?
We offer standard traceable calibration and ISO 17025 accredited calibration services.
Get your PMA Automatic RCL Meter calibrated today! Click Here!
There are currently no reviews for this product.
