Fluke T+PRO/CAN - Canada Electrical Tester
Overview
Features
Specifications
Calibration
Safer than traditional solenoid testers and fully compliant with NFPA 70E*
The T+PRO Electrical Testers offer all the functionality that electricians look for in volt meters and voltage and continuity testers:
- Three ways to detect AC/DC voltage: light, sound, and vibration
- Added functionality of a GFCI trip and continuity beeper, plus the convenience of a built-in flashlight
- The T+PRO Electrical Tester comes with a rotary field indicator for troubleshooting three-phase systems, resistance measurement to 9.99 KOhms, as well as a backlit LCD display for easier viewing
Safer than traditional solenoid testers:
- Solid-state tester design
- CAT IV 600 V, CAT III 1000 V rated
- Complies with NFPA 70E*
The ruggedness and reliability that customers have come to expect from Fluke
* When used properly per Article 110.9 Use of Equipment (A) Test Instruments and Equipment.
Features and benefits of the T+PRO:
- Backlit LCD display for easier viewing
- Display resolution of 0.1 V, ideal for troubleshooting low-voltage lighting
- Resistance (Ohms) to 9.99 kOhms
- Rotary Field Indication
- Display Hold for easier viewing in hard-to-test areas
- 3 forms of AC/DC voltage indication: light, sound, and vibration for added user protection and convenience
- Detect live voltage even when the batteries are dead
- Extra heavy-duty, replaceable test leads for more flexibility and durability
- CAT IV 600 V, CAT III 1000 V rated for added user protection
- Continuity beeper
- Bright LED flashlight for work in poorly lit areas
- GFCI Trip
- On/Off switchable beeper, selectable according to your environment
- Compliant with latest NFPA 70E recommendations*
- Replaceable test probes for added flexibility and convenience
- Convenient probe storage on the back
- Probe holder for easier testing
- Hazardous voltage warning light for added user protection
- Test lead strap included for better test lead management
- AC/DC Voltage: 12 V – 600 V on LED bar, 10.2 V – 600 V on LCD
- Auto-off saves battery power
- 2-year warranty
* When used properly per Article 110.9 Use of Equipment (A) Test Instruments and Equipment
| Specifications | ||
| Temperature | Operating | -10 °C to 55 °C (14 °F to 131 °F) |
| Storage | -30 °C to 60 °C (-22 °F to 140 °F) | |
| Relative Humidity | 90 % | 0 °C to 30 °C (32 °F to 86 °F) |
| 75 % | 30 °C to 40 °C (86 °F to 104 °F) | |
| 45 % | 40 °C to 50 °C (104 °F to 122 °F) | |
| Altitude | Operating | 2,000 m (approx. 6,561.6 ft) |
| Storage | 10,000 m (approx. 32,808.4 ft) | |
| Battery Type/Life | AAA (2); 40 hours | |
| Shock, Vibration | Sinusoidal vibration per MIL-PRF-28800F for a Class 2 instrument | |
| Safety | ISA-82.02.01 (IEC 61010-1 Mod) Second Edition, CAN/CSA-C22.2 No. 61010-1 Second Edition, IEC 61010 - 1 to 1000 V CAT III/600 V CAT IV Compliance to NFPA 70E* |
|
| AC Bandwidth | 45 Hz to 66 Hz | |
| Maximum Working Voltage | 1000 V AC/DC | |
| Maximum Measurable Voltage | 600 V AC/DC | |
| Duty Cycle | Indefinitely for voltages up to 240 V | |
| For voltages between 240 V and 600 V the duty cycle is 30 s on / 300 s off | ||
| For voltages above 240 V the tester must connect to a voltage source only for a MAXIMUM of 30 s and then disconnect for a MINIMUM of 300 s | ||
| Voltage Hazard LED | LEDs turn on at voltages > 30 V AC/DC ± 35 % | |
| LED Voltage Indication Levels | 12 V, 24 V, 48 V, 120 V, 208 V, 240 V, 347 V, 480 V, 600 V | |
| LEDs | LEDs turn on between 90 % and 100 % of the indicated voltage on the LED, except for the 12 V LED which turns on between 50 % and 100 % | |
| LCD Accuracy | AC voltage | ± (3 % rdg + 2 digits) |
| DC voltage | ± (2 % rdg + 2 digits) | |
| Resistance | ± (5 % rdg + 3 digits) | |
| LCD Resolution | 0.1 V for voltages < 50 V, 1 V for voltages ≥ 50 V | |
| 0.01 kΩ for resistance measurement | ||
| GFCI Test Current | 100 V - 150 V @ 6 mA - 9 mA AC, 150 V - 240 V < 12 mA | |
| Standard Input Test Current | < 5 mA | |
| Size (HxWxL) | 1.3 in x 2.15 in x 7.6 in (3.3 cm x 5.46 cm x 19.3 cm ) | |
| Weight | 9.9 oz (0.28 kg) | |
*When used properly per Article 110.9 Use of Equipment (A) Test Instruments and Equipment.
Do you have a Canada Electrical Tester that needs to be calibrated?
We offer standard traceable calibration and ISO 17025 accredited calibration services.
Get your Canada Electrical Tester calibrated today! Click Here!
There are currently no reviews for this product.
