AMPROBE AT-7000-T - Advanced Wire Tracer Transmitter
Get accurate results in minutes with new features and technologies that simplify wire tracing and breaker identification. The Receiver’s patented Smart Sensor,™ with its innovative new antenna design and advanced signal processor, clearly displays the location and orientation of energized wires in walls, floors and ceilings on the large color TFT LCD screen. The powerful Transmitter utilizes two optimal frequencies for both energized
and de-energized wire and breaker tracing, delivering consistently accurate results for novice users and experts alike. The new Scan and Locate feature clearly identifies the one correct breaker or fuse, eliminating the confusion from multiple false positive readings common in older technology tracing tools.
- Traces wires in walls, ceilings, floors and corners
- Locates breakers and fuses
- Pinpoints shorts and opens
- High resolution 3.5” TFT LCD color display
- Three power modes
- “High” power mode for normal circuits
- “Low” power mode for precision tracing in difficult areas
- “Clamp” power mode provides a boosted signal using signal clamp
- Two automatically selected frequency modes for optimal tracing on energized and de-energized circuits
- Signal booster rechargeable battery pack (BR-7000-T) increases transmitter signal strength
- Clamp-on attachment (SC-7000) for inducing signal into wires without access to bare conductors
- Embedded help screens make set-up easy and error free
| TFT LCD Color Display Size | 1.77 in(4.5 cm) |
| TFT LCD Color Display Dimensions | 1.1 x 1.38 in (2.79 x 3.51 cm) |
| TFT LCD Color Display Resolution | 128px x 160px |
| TFT LCD Color Display Type | RGB x TFT |
| TFT LCD Display | • |
| Backlight | • |
| mDDR | 64 MB |
| FLASH memory | 128 MB |
| Audio | - |
| Operating Temperature range | 0 to 120°F (-17.77°C to 49°C) |
| Storage Temperature | -40 to 150°F (-40 to 65.5°C) |
| Operating Humidity | 95% R.H. max |
| Operating Altitude | 2000 m |
| Measurement Category | CAT IV 600V |
| Transient protection | 8.00 kV (1.2/50 µS surge) |
| Pollution Degree | 2 |
| Drop Test | 3.28ft (1m) |
| Power Supply | 90-270 V AC/DC, 10-400 Hz AT-7030: BR-7000-T: LI-ION, 7.2 V, 2.2Ah AT-7020: 6x AA Alkaline Battery |
| Power consumption | AT-7030: BR-7000-T battery: 2W AT-7020: 6x AA battery: 2W AC line voltage (Charging state): 10W AC line voltage: 3W |
| Charging Voltage (BR-7000-T) | 85-270 V |
| Charging Duration (BR-7000-T) | 16 h |
| Power Up Time | 20 s |
| Non-Rechargeable Battery lifetime | 9 h |
| Rechargeable Battery lifetime (BR-7000-T) | 10 h |
| Leakage current (non-rechargeable) | 6 to 14 µA |
| Leakage current (rechargeable) | 1.2 to 4 µA |
| IP Rating | IP40 |
| Sampling Rate | 62.5 kSPS |
| Signal Response | Numeric display |
| Response Time | Voltage measurement: 1.5 s Battery monitoring: 5 s |
| Voltage Measurement | 9-600 V, DC to 400 Hz |
| Non-Contact Voltage(NCV) | - |
| LED Indicator | Red: Energized OFF: De-Energized Orange: Over Voltage |
| Operating Frequency | Voltage measurement: 40-400 Hz Energized: 6.25 kHz De-Energized: 32.768 kHz |
| Acoustic Indication | - |
| Range Detection (Open air) | - |
| Smart mode | - |
| TIP Sensor: Energized | - |
| TIP Sensor: De-Energized | - |
| NCV | - |
| Current Output (Low) Energized | 53 mA rms |
| Current Output (High) Energized | 92 mA rms |
| Current Output (Low) with BR-7000-T Energized | 53 mA rms |
| Current Output (High) with BR-7000-T Energized | 120 mA rms |
| Voltage Output (Low) De-Energized | 60 Vp-p |
| Voltage Output (High) De-Energized | 120 Vp-p |
| Voltage Output (Clamp) De-Energized | 180 Vp-p |
| Jaw Opening |
- |
| Fuse | 3.15A 600 V MAX, SLOW 5X20MM |
| Dimensions | 8.5 x 4 x 2.2 in (21.59 x 10.16 x 5.59 cm) |
| Weight | 1.30 lb (0.593 kg) |
Do you have a Advanced Wire Tracer Transmitter that needs to be calibrated?
We offer standard traceable calibration and ISO 17025 accredited calibration services.
Get your Advanced Wire Tracer Transmitter calibrated today! Click Here!
There are currently no reviews for this product.
