Fluke 190-504/AM - 500 MHz ScopeMeter Test Tool
Why choose the new 500 MHz two-channel ScopeMeter® test tool?
A faster sample rate and higher bandwidth means greater accuracy and clarity. The scope will capture and display unknown waveform shapes, amplitudes and any disturbances. In order to display at least the fifth harmonic component of a signal, a good rule of thumb is to select a scope with a bandwidth of at least five times the maximum clock rate of the device under test. The faster the sample interval, the more accurate and detailed the scope will display a signal edge (dV/dt) and peaks of any reflections or transients.
See More, Fix More with the Two-Channel CAT IV Rated Fluke ScopeMeter®
The Fluke ScopeMeter® 190-502 combine the highest safety ratings and rugged portability with the high performance of a bench oscilloscope. Designed for plant maintenance engineers and technicians, these tough ScopeMeter® test tools go into harsh, dirty, and hazardous industrial conditions to test everything from micro-electronics to power electronics applications.
The 190-502 ScopeMeter® is the one test tool you will reach for to tackle just about any troubleshooting task. They include a multimeter, TrendPlot™ and ScopeRecord™ roll paperless recorder modes and hands free operation with Connect-and-View™ triggering, and much more:
- Two electrically isolated inputs
- CAT III 1000V / CAT IV 600V safety rated
- 500 MHz bandwidth model
- 5 GS/s
- Deep memory: 10,000 samples per channel waveform capture so you can zoom in on the details
- Dedicated 5000 Count digital multimeter
- Connect-and-View continuous auto-trigger, single shot, pulse width, and video triggering
- ScopeRecord roll mode, capture waveform sample data for up to 48 hours
- TrendPlot, trend measurement readings for up to 22 days
- Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
- IP-51 rated for dust and drip proof to withstand harsh environments
- Isolated USB ports for memory devices and PC connectivity
- Li-Ion battery for extended operating timespan
- Up to 4 hours (BP290 included standard) or up to 8 hour with optional BP291
- Charge spare battery using optional external battery charger EBC290
- Easy-access battery door to make it easy to swap batteries
- A handy slot to tether and lock down the oscilloscope while unattended using a standard Kensington® lock
| Specifications | |
| Bandwidth | 500 MHz |
| Number of channels | 500 MHz: 4 channels |
| Real-time sample rate | 5 GS/s |
| Inputs | 4x BNc input scope plus DMM input |
| Independently floating isolated inputs | Up to 1000 V CAT III/600 V CAT IV between inputs, references and ground |
| Input sensitivity | 2 mV-100 V/div plus variable attentuation |
| Trigger types | Connect-and-View™, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle |
| Trigger source | 4x BNC input |
| Glitch capture | 8 ns |
| Scope measurements | Cursor: 7 |
| Automatic: 30 | |
| Maximum record length | ScopeRecord mode: 30,000 pts per input |
| Scope mode: 10,000 pts per input | |
| Persistence | Digital persistence giving analog oscilloscope-like waveform decay |
| Waveform compare | Waveform reference with automatic Pass/Fail testing |
| DMM Specification | |
| Meter inputs | BNC inputs function as DMM input |
| Maximum resolution | 999 counts |
| Measurements | VDC, VAC rms, VAC + DC rms, Current (through clamp or shunt), Temperature °C or °F (using optional converter) |
| Memory | Screen + Setup: 30 |
| Recording: 10 | |
| Display | 153 mm full color LCD with fast update rate |
| Environmental Specifications | |
| Operating temperature | 0°C to 40°C Including Batteries |
| 0°C to 50°C Excluding Batteries | |
| Storage temperature | -20°C to +60°C |
| Operating altitude | Up to 2,000 m (6666 ft) for CAT IV 600 V/ CAT III 1000 V |
| Up to 3,000 m (10,000 ft) for CAT III 600 V/ CAT II 1000 V | |
| Safety Specifications | |
| Electrical safety | 1,000 V CAT III/600 V CAT IV (EN61010-1) |
| Mechanical and General Specifications | |
| Size | 270 x 190 x 70 mm |
| Weight | 2.2 kg |
| Warranty | Three-years on main instrument |
| Li-Ion battery | BP 291 (4800mAh) |
| Included Accessories | |
| VPS410 Voltage Probe Sets (one red, one blue) | |
| BC190 Battery Charger/mains Adapter | |
| BP291, 4800 mAh Li-Ion battery | |
| Handstrap (affixed to instrument) | |
| Hangstrap | |
| Multi-Language User Manuals on CD-Rom | |
| FlukeView ScopeMeter® demo package (restricted functionality) | |
| USB Interface Cable | |
| Warranty | One year on accessories |
Do you have a 500 MHz ScopeMeter Test Tool that needs to be calibrated?
We offer standard traceable calibration and ISO 17025 accredited calibration services.
Get your 500 MHz ScopeMeter Test Tool calibrated today! Click Here!
There are currently no reviews for this product.
