AMPROBE ACD-10-TRMS-PLUS - 600A Clamp Multimeter
Overview
Features
Specifications
Calibration
Amprobe ACD-10 TRMS-PLUS clamp meter takes AC/DC measurement with true-rms accuracy and offers capacitance and frequency. It also offers thinner jaws over standard clamp meters allowing access to tight areas and still accommodates conductors up to 25 mm.
- AC & DC Voltage to 600V
- AC Current to 600A
- Thin jaws, only 10mm (0.4) thick
- Resistance to 40MΩ
- Continuity buzzer
- Capacitance to 3000 uF
- Frequency measurement
- In rush current
- Hold & maximum reading functions
- Accommodates conductors up to 26mm (1.02) in diameter
- Auto ranging
- Auto power off
- Rubber over-molded case
- Overload protected
- True-rms measurement
- Included accessories: test leads, battery installed, soft carrying pouch, and users manual
| FEATURE | ACD-10 PLUS | ACD-10 TRMS-PLUS |
| True-rms | - | • |
| AC Voltage | 4.000 V, 40.00 V, 400.0 V, 600 V | |
| DC Voltage | 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 600 V | |
| AC Current | 40.00 A, 400.0 A, 600 A | |
| Resistance | 400.0 Ω, 4.000 kΩ, 40.00 kΩ, 400.0 kΩ, 4.000 MΩ, 40.00 MΩ | |
| Capacitance | 500.0 nF, 5.000 μF, 50.00 μF, 500.0 μF, 3000 μF | |
| Frequency | 40 Hz → 400 Hz with Jaw, 10 Hz → 100 kHz with test leads | |
| Temperature | - | - |
| Dual displays | - | - |
| Micro Amps | - | - |
| Accommodates conductors | up to 1.0†(25 mm) in diameter | |
| Specifications | |
| Display: | 3-3/4 digits 4000 counts LCD display |
| Update rate: | 3 per second nominal |
| Polarity: | Automatic |
| Operating temperature: | °C to 40 °C; < 80% RH for temperature up to 31 °C decreasing linearly to 50% RH at 40 °C |
| Altitude: | Operating below 2000m; Indoor use |
| Storage temperature: | -20 °C to 60 °C, < 80% RH (with battery removed) |
| Temperature coefficient: | nominal 0.15 x (specified accuracy)/°C @(0 °C ~ 18 °C or 28 °C ~ 40 °C) |
| Low battery: | Below approx. 2.4V |
| Power supply: | 3V coin battery IEC-CR2032 |
| Power consumption: | 2.8 mA typical except that 3.3 mA typical for ACA function |
| APO timing: | Idle for 30 minutes |
| APO consumption: | 5 µA typical |
| Jaw opening & conductor diameter: | max 26 mm |
| Special features: | 30ms Max Hold; Data Hold; Relative Zero mode |
Do you have a 600A Clamp Multimeter that needs to be calibrated?
We offer standard traceable calibration and ISO 17025 accredited calibration services.
Get your 600A Clamp Multimeter calibrated today! Click Here!
There are currently no reviews for this product.
