Fluke TI50FT10/20/54 - IR FlexCam Thermal Imager with IR-Fusion Technology, -20C to 350C
Minimize Downtime and Take the Mystery Out of Image Analysis
The Ti50FT, an articulating thermal imaging camera offers 320 x 240 resolution with IR-Fusion® technology – the blending of digital and infrared images into a single image and delivers crisp, quality images, helping you better identify and report issues in hard to reach places. With thermal sensitivity of ≤ 0.07°C at 30°C (70 mK) and a temperature range from -20° to 350°C (-4° to 662°F) the Ti50 is ideal for troubleshooting electrical and mechanical applications, predictive maintenance, quality control, process monitoring and research and development.
A Sharper Image at 180° Angle
View and capture images in areas with poor accessibility with the 180° articulating lens and a five inch display that remains clearly visible during inspection. The SmartFocus wheel simplifies getting a stable and sharp image and SmartView® Software allows for IR analysis and reporting and is included at no additional charge. Save time and money, identify problems easily and quickly with the Ti50FT.
For a non-articulating thermal imaging camera with a high temperature range and low thermal sensitivity (NETD), the Ti400is an alternative choice. It features wireless connectivity for quick and easy sharing of images, LaserSharp® Auto Focus for consistently in-focus images - every, single, time and a ruggedized high resolution 640x480 capacitive touch screen for quick menu navigation.
Fluke IR-Fusion Technology
Infrared and Visible light images are fused together - enabling you to view images in a range of modes from full IR to full visible light, and see exactly what you are viewing.
See exactly what you are viewing
Fluke IR-Fusion® technology links a real world visual image with a thermal image. It merges the two images into one, with the possibility to blend between the two images or create picture-in-picture combinations. Alarm limits can be superimposed over the visible light image to exactly pinpoint the components exceeding a specified temperature limit. Both the visual images and thermal images are available for use in reports. This speeds up documentation by reducing the need to look for individual images taken with a separate digital camera. IR Fusion helps to better identify and report suspect components and enable the repair to be done right the first time.
Large, sharp thermal images
Thanks to a large five-inch display and low-noise VOx sensors, the Fluke IR FlexCam units produce exceptionally high-quality images making even the smallest temperature differences visible. This is comparable with images normally only obtained on far more expensive instruments.
A sharp image in every situation
The innovative 180 ° articulating lens makes it possible to view and capture images in areas with poor accessibility. The display remains clearly visible while viewing over high objects, under a machine or around immoveable obstructions. The SmartFocus wheel simplifies getting a stable and sharp image. No need to take your hand off the instrument to turn a focus ring.
Make anomalies visible
Thanks to built-in functions like AutoCapture, the IR FlexCam Thermal Imagers help to troubleshoot difficult problems. The instrument is easily set up to automatically capture only those images where a temperature limit is exceeded. This way, difficult to find intermittent problems can be captured and analyzed quicker by concentrating only on the images containing the anomalies.
Analysis and reporting comes standard
The SmartView™ software (supplied with the unit) includes a complete range of infrared image viewing, analysis, annotation and reporting tools. It even allows for customized reports to accommodate specific company work processes or requirements like multiple image reporting and comparisons.
Radiometric measurement – the ‘data behind the picture’
Fully radiometric thermal imagers capture and store calibrated temperature data for the matrix of thousands of points that make up a thermal image. This makes it possible to perform detailed analysis and change key parameters like emissivity or temperature range either in the field on the camera or in the office using the PC software.
| Temperature Measurement | |
| Calibrated temperature range | -20°C to 350°C (-4 to 662°F) in 2 ranges |
| Range 1 | -20°C to 100°C (-4 to 212°F) |
| Range 2 | -20°C to 350°C (-4 to 662°F) |
| Accuracy | ±2°C or 2% (whichever is greater) |
| Measurement modes | Centerpoint, center box (area min/max, average) |
| Emissivity correction | 0.1 to 1.0 (0.01 increments) |
| Imaging Performance | |
| Thermal Field of view (FOV) | 20 mm lens 23° x 17° FOV 10.5 mm lens 42° x 32° 54 mm lens 9° x 6° |
| Spatial resolution (IFOV) | 1.30 mrad |
| Thermal sensitivity (NETD) | ≤ 0.07°C (70 mK) at 30°C |
| Detector data acquisition | 60 Hz |
| Focus | SmartFocus; one finger continuous focus |
| IR digital zoom | 2x |
| Detector type | 320 x 240 Focal Plane Array, Vanadium Oxide (VOx) Uncooled Microbolometer with 25 micron pitch |
| Spectral band | 8 µm to 14 µm |
| Digital image enhancement | Automatic full-time enhanced |
| Visual on camera operating modes | Full thermal, full visual light or merged thermal-visual images. Picture-in-picture |
| Visible light camera | 1280 x 1024 pixels, full color |
| Visible light digital zoom | 2x |
| Image Presentation | |
| Digital display | 5 in large high-resolution digital display |
| LCD backlight | Sunlight readable color LCD |
| Video output | RS170 EIA/NTSC or CCIR/PAL composite video |
| Optional Lenses (Only available at time of purchase) | |
| 54 mm Telephoto lens | High precision Germanium lens |
| Field of view (FOV) | 9° horizontal x 6° vertical |
| Spatial resolution (IFOV) | 0.47 mrad |
| Min focus distance | 0.6 m |
| 10.5 mm wide angle lens | High precision Germanium lens |
| Field of view (FOV) | 42° horizontal x 32° vertical |
| Spatial resolution (IFOV) | 2.45 mrad |
| Min focus distance | 0.3 m |
| Image Capture and Data Storage | |
| Storage medium | Compact flash card stores over 1000 IR images (1 GB card standard) |
| File formats supported | 14 bit measurement data included. Exportable JPEG, BMP, PCX, PNG, PSD. |
| Interfaces and Software | |
| Interface | Compact flash card reader included |
| Software | SmartView; full analysis and reporting software included |
| Laser | |
| Classification | Class II |
| Laser targeting | Laser dot visible on screen when blending thermal and visible image |
| Controls and Adjustments | |
| Set-up controls | Date/time, temperature units C/F/K, language, scale, LCD intensity (high/normal/low) |
| Image controls | Level, span, auto adjust (continuous/manual) |
| On-screen indicators | Battery status, target emissivity, background temperature and real time clock |
| Set-up controls | Date/time, temperature units C/F/K, language, scale, LCD intensity (high/normal/low) |
| Power, Battery Life | |
| Battery type | Li-Ion smart battery, rechargeable, field-replaceable |
| Battery operating time | 3 hours continuous operation (2 hours with IR-Fusion engaged) |
| Battery charging | 2 bay intelligent charger powered via AC outlet |
| AC operation | AC adapter 110/220 V AC, 50/60 Hz (Ti55 only) |
| Power saving | Automatic shutdown and sleep modes (user specified) |
| Environmental and Mechanical Design | |
| Operating temperature | -10°C to +50°C (14°F to 122°F) |
| Storage temperature | -40°C to +70°C (-40°F to 158°F) |
| Relative humidity | Operating and storage 10% to 95%, non-condensing |
| Water and dust resistant | IP54 |
| Weight (including batteries) | 1.95 kg (4.3 lbs) |
| Camera size (H x W x D) | 162 x 262 x 101 mm (6.5 x 10.5 x 4.0 in) |
| Other | |
| Warranty | 2 years |
Do you have a IR FlexCam Thermal Imager with IR-Fusion Technology, -20C to 350C that needs to be calibrated?
We offer standard traceable calibration and ISO 17025 accredited calibration services.
Get your IR FlexCam Thermal Imager with IR-Fusion Technology, -20C to 350C calibrated today! Click Here!
There are currently no reviews for this product.
