Graphtec America GS-CO2 - CO2 density sensor
Overview
Features
Specifications
Calibration
The compact GL100 datalogger CO2 density sensor designed for industries requiring climate monitoring and control such as greenhouse, hydroponics, agriculture and botanical rooms gives managers real time environment and climate monitoring. Fine arts museums and galleries are also served for controlled environment settings where the GL100 excells!
| Sensor Method | NDIR System (non disperv infrared) | |
| Measurement Data | CO2 Concentration | |
| Measurement Channels | 1ch | |
| Measurement Range | 0 to 9,999ppm | |
| Measurement Accuracy | ±(5% of rdg + 30ppm) In the range between 0 and 5000ppm | |
| Response Time | 3 minutes or less | |
| Sampling Intervals | 0.5 | 1 | 2 | 5 | 10 | 20 | 30 sec 1 | 2 | 5 | 10 | 20 | 30 | 60 min CO2 sampling interval is 2 seconds or slower. For sampling selection slower than 2 seconds, same values are recorded and new values are updated every 2 seconds. |
|
| Calibration | ON / OFF | |
| Extension Cable | Approximately 20cm | |
| Operating Environment | 0º to 50ºC, 80% RH and below (non-condensed) | |
| External Dimensions | 66mm x 100mm x 24.6mm (excludes protrusion) | |
| Weight | 99g (3.49 oz) | |
Do you have a CO2 density sensor that needs to be calibrated?
We offer standard traceable calibration and ISO 17025 accredited calibration services.
Get your CO2 density sensor calibrated today! Click Here!
There are currently no reviews for this product.
