Leaptronix SU-600 - Flash Programmer

SU-600 is a newly-designed programmer for the high-density NAND/NOR/SPI Flash. It provides the highest speed and stability for R&D and small production. Furthermore, for the special application of NAND Flash, it provides Bad Block Skip programming, verifying, the master reading, and device analysis function.

In addition, SU-600 support flexible multiprogramming system. It means you can connect 4 units SU-600 on the same PC for 4 site programming. SU-600 is the best selection for programming the new generation diverse Flash devices.

• Supports NAND Flash analysis function, able to find the bad block location and the relative size.
• Ultra high programming speed: 32M bits/sec.
• Supports NAND Flash Bad Block Skip programming and verifying.
• Intelligent NAND Flash master reading, you can select Bad Block Skip or whole device reading.
• Auto-detect function for the wrong insertion and bad connection of pins.
• USB high speed interface, able to connect 4 units SU-600 on the same PC for 4 site programming.
• Independent socket circuit design which increase the programming stability.
• Stand-alone industrial LED start button. The Pass, Fail and Work LEDs clearly show the programming situation.
• Provides device data used map analysis function. Let you easily know the whole device data distributed situation.
• Provides mass production oriented software, included project operation, programming quantity control and yield statistics.

Specification

• User RAM：64 MBytes
• Button/Switch：START LED / ID Setting
• User Interface：Power LED, Work / Pass / Fail LEDs on each site
• Communication：USB 2.0
• Power：90V AC ~ 260V AC (Auto-Switching)
• Frequency Range：47/63Hz
• Power Consumption：24W(Max)
• Dimension：11.6cm x 24cm x 6cm (Socket and START Key are not included)
• Weight：1.5Kg
• Operating Altitude：up to 5000m
• Operating Humidity：20%~70% (non-condensing)
• Temperature：+5℃ ~ +45℃

 File Type Supported

• Binary˴Intel HEX˴Tek HEX˴Motorola HEX˴ASCII HEX , etc.

PC System Requirement

• Operating System：Windows 10 / 8 / 7 / Vista / XP ( 32bits & 64bits )
• CPU：Pentium 4 and above
• Memory：1GB~2GB RAM and above
• Hard Disk：500M Byte and above
• Communication：USB2.0

Standard Accessories

• Main unit x 1
• CD x 1 (Driver and user manual are included)
• USB cable x 1
• AC power cord x 1
• Adaptor screw x 18

Optional Accessories

• TSOP, TSSOP, BGA, uBGA, VSOP, SOP, SSOP, PLCC, etc.

Do you have a Flash Programmer that needs to be calibrated?

We offer standard traceable calibration and ISO 17025 accredited calibration services.