Leaptronix LP-456 - Universal Gang 4 Programmer

LP-456 is ultra-speedy universal 4x48 pin-drive concurrent production programmer. Youcan just use the general type adapters on the market for efficient multiprogrammingsolution.

• Four independent universal programming pin-driverin one unit.
• Provides with DUT 75MHz bandwidth and < ±2.5nS signal skew. In addition to the high processing speed, you can verify whether the devices working frequency meet their specifications.
• Provides Hands-free Operation. The asynchronous and concurrent operation allows a chip to begin programming immediately upon insertion of chip. The operator just take off the finished device and inserts a new device.
• Provides mass-production-oriented software. There is used a Project file to control LP-456 to minimize the operator error. Moreover, it provides programming history and yield statistic for needs of production managements.
• Provides insertion test and contact check before programming.
• General type adapter can be used on LP-456, save money and convenience.

Specification

• User RAM：64 MBytes
• Button/Switch：START LED / ID Setting
• User Interface：Power LED, Work / Pass / Fail LEDs on each site
• Communication：USB 2.0 High Speed
• Power：100V AC~240V AC
• Frequency Range：50/60Hz
• Power Consumption：75W(Max)
• PIN DRIVERS：48 Pin Universal Pin-Driver x4
• DUT SORCKET：DIP-48 ZIF(Zero Insertion Force) x 4
• Dimension：37.2cm x 20.5cm x 4.5cm (Socket and START Key are not included)
• Weight：2.1Kg
• Operating Altitude：up to 5000m
• Operating Humidity：20％~70％ (non-condensing)
• Temperature：+5℃ ~ +45℃

Supported Devices

• NOR FLASH, SPI EPROM, EEPROM, MPU, MCU, CPLD, NV-RAM…etc.

File Type Supported

• Binary/Machine Code, Intel HEX, TEK HEX Motorola HEX

PC System Requirement

• Operating System：Windows 10 / 8 / 7 / Vista / XP ( 32bits & 64bits )
• Processor：Pentium 4 Above
• Memory：2 GB RAM Above
• Hard Disk：
  • 500MB Above
  • Buffer 2GB Above
• Communication：USB 2.0 HIGH SPEED

Standard Accessories

• Main unit x 1
• CD x 1 (Driver and user manual are included)
• USB cable x 1
• DC 5V/6A 30Wpower adapter x 1

Optional Accessories

• PLCC, JLCC, SDIP, SOP, VSOP, SSOP, TSOP, TSSOP, QFP, PQFP, TQFP, VQFP, BGA, uBGA, SON, WSON, QFN(MLF)..... adapters

Do you have a Universal Gang 4 Programmer that needs to be calibrated?

We offer standard traceable calibration and ISO 17025 accredited calibration services.