Leaptronix WICE-52 - MCS-51 On-Board-Debug

8051 is the most popular single chip on the microcontroller series. It is the best option to learn the basic experiment or circuit design for the department of Science and Engineer ing. When you conduct the MCS-51 experiments or debug its program, the WICE-52 can provide you the best assistance.

The WICE-52 adopts OCD(On-Chip-Debug) technology from company Megawin. It is compatible with Keil's 8051 IDE debug simulation interface and supports "Single Step", "Full Speed", "Pause", and "Reset" functions of on-chip debugging.

• Mini size, only 70mm(L) x 23mm(W) x 15mm(H). You can insert it into the 8051 socket of the PCB and connect with the PC via USB cable for starting using.
• Support standard MCS-51 series IC which ROM is under 64K Bytes debug &emulate function.
• For 1T MCU commands can be conducted within 1-3 clock and up to 24MIPS. If you want to emulate 4T or 12T 8051 IC by WICE-52, must notice the difference of clock and the delay setting.
• Power Monitor is embedded. When VDD is under-voltage, it will interrupt or reset.
• Directly using Keil 8051 IDE software interface. The debug function is applied to Keil IDE dScope-Debugger. It is compatible with Keil’s μVision2 or μVision3. 
• (Note: Keil 8051 IDE software is not included in the product.)
• Powerful debug function: "Single Step", "full Speed", "Pause", and "Reset" etc.
• Programmable interrupts, user can insert 4 interrupts in one time.
• Keil 8051 IDE, contains register/disassembler/watch/ memory etc.
• Going with the Leap UP-2,MCS-51/AVR/PIC MCU Experimental Board, is best trainer for MCU. 

Specification

• Communication: USB
• Power: USB
• Dimension: 70 mm x 23mm x 15mm
• Weight: 22g

Hardware Specification (same as Megawin MPC82G516)

Supported Device

• The core chip of the WICE-52 is the high performance 1T framework. When using early 4T/ 6T/ 12T 8051 devices, must pay attention to the setting of the clock and delay.
• Due to the 1T framework, the quartz crystal only needs 24MHz(MAX) can achieve 24MIPS performance. It's much higher other 8051 devices of 4T framework which work at 40MHz, 10MIPS performance. The quartz crystal is embedded in the WICE-52 and common clock is 12MHz/ 22MHz.

Standard Accessories

• Main unit x 1
• USB Cable x 1
• CD-ROM (user's manual included) x 4

Do you have a MCS-51 On-Board-Debug that needs to be calibrated?

We offer standard traceable calibration and ISO 17025 accredited calibration services.