APM SPS300VAC1800W - Single 3-Phase Output Programmable AC Power Supply
APM Three phase AC source system is a single 3-phase output programmable AC power supply which provides with high power density. With high speed DSP+CPLD control, high frequency PWM technology, active PFC design, It is able to provide not only stable DC/AC output power,but also 3-phase / 1-phase output. It is featured with high power density, high reliability and high precision, meanwhile it possesses operation interface of touch screen and keys manually. It is able to analog output normal or abnormal power input for electrical device to meet test requirements, which is applicable to electric, lighting, aviation sectors, etc. It could be applied to enterprise's production test as well. This series is applicable to multiple sectors such as electric, lighting and aviation sectors and it could be applied to enterprise's production test as well.
- 4.3" large touch color screen, possess complete functions and easy to operate.
- AC+DC mixed or independent output mode for voltage DC offset simulation.
- Capable of setting voltage and current output restriction, support for constant current output mode.
- Capable of setting output slope of voltage and frequency.
- Capable of setting ON/OFF phase angle.
- With reverse current protection to avoid current flowing backward.
- Built-in power meter, which is capable of measuring 5 electrical parameters per phase, including voltage, current, power, etc.
Input
Voltage | 90~265VAC |
Frequency | 47~63Hz |
Phase | 3 Phase, 4Wire + Ground/Y Connect |
Max.Current | 30A |
Power Factor at 22OVAC Input ,Full Load | ≥0.96 Active PFC |
Efficiency | >81% (Peak) >80% at 22OVAC,5OHz input/22OVAC,5OHz output,Full Load |
3-Phase Output Mode
AC Power(Per Phase) | 600VA | ||||
AC Power(Total) | 1800VA | ||||
Max. Current (r.m.s.) |
| ||||
Max. Current (peak) |
|
Parallel Output Mode
Max. Current (r.m.s.) |
| ||||
Max. Current (peak) |
| ||||
Phase | 1 Phase |
Output
Total Harmonic Distortion (THD) | <0.5% (Resistive Load) at 15.0-70.OHz and output voltage within the 80-14OVAC Low Range or the 160-28OVAC at High Range <1% (Resistive Load) at 70.1-5OOHz and output voltage within the 80-14OVAC at Low Range or the 160-28OVAC at High Range <1% (Resistive Load) at 501-lOOOHz and output voltage within the 100~14OVAC at Low Range or the 160-28OVAC at High Range | ||||||||||||||||||||||||||
Crest Factor(CF) | ≤ 6 | ||||||||||||||||||||||||||
Load Regulation | ±0.2%F.S. (Resistive Load) at 15~100Hz ±0.5%F.S. (Resistive Load) at >100Hz | ||||||||||||||||||||||||||
Line Regulation | ±0.1V | ||||||||||||||||||||||||||
Voltage(AC) (L-N) |
| ||||||||||||||||||||||||||
Phase Angle (Starting/Ending) |
| ||||||||||||||||||||||||||
Voltage(DC) |
| ||||||||||||||||||||||||||
Current OC Fold Mode |
| ||||||||||||||||||||||||||
Frequency |
| ||||||||||||||||||||||||||
Programmable Output Impedance | Not Supported | ||||||||||||||||||||||||||
Harmonic & Inter Harmonics Simulation | Not Supported |
Measurement
Voltage (Per Phase) |
| ||||||||||
Frequency (Per Phase) |
| ||||||||||
Current (r.m.s) (Per Phase)* |
| ||||||||||
Current (Peak) (Per Phase) * |
| ||||||||||
Power (Per Phase) |
| ||||||||||
Power Apparent(VA) (Per Phase) |
| ||||||||||
Power Resistive (VAR) (Per Phase) |
| ||||||||||
Power Factor (PF) |
| ||||||||||
Harmonic Range | Not Supported |
Extra Function
Slew Rate |
| ||||||||
Remote Sense |
| ||||||||
Calibration | Firmware-based calibration through the digital interface or front panel display | ||||||||
Test Function | Not Supported | ||||||||
Graphic Display | 4.3" Color touch LCD | ||||||||
Operation Key Feature | Soft key, Numeric key, Rotary Knob, Support USB disk | ||||||||
Rack mount Handles | Yes | ||||||||
Fan | Temperature Controlled | ||||||||
Protection Circuits | OCP, OVP, OPP, OTP, RCP, PRI_UVP, PRI_OVP, PRI_OTP, PRI_OCP, USB_OCP | ||||||||
Interface | USB, RS485, RS232, LAN(Option), GPIB(Option) |
Environmental
Operating Temperature | 0°C to 40°C |
Storage Temperature | -40°C to 85°C |
Altitude | 2000m |
Relative Humidity | 5%-95%, non-condensing |
Temperature Coefficient | 100ppm/°C at Voltage, 300ppm/°C at Current, 100ppm/°C at Frequency |
Mechanical
Dimensions(W*H*D) | 540mm * 400mm * 640mm |
Package Dimensions (W*H*D) | 660mm * 575mm *800mm |
Unit Net Weight | 88.7kg |
Accessories Weight | 0.4kg |
Gross Weight | 108.7kg |
Regulatory Compliance
CE Mark | Installation Overvoltage Category II ; Class II equipment; indoor use only. |
Do you have a Single 3-Phase Output Programmable AC Power Supply that needs to be calibrated?
We offer standard traceable calibration and ISO 17025 accredited calibration services.
Get your Single 3-Phase Output Programmable AC Power Supply calibrated today! Click Here!
There are currently no reviews for this product.