GW Instek GLP-1A - Logic Probe and Pulser
The GLP-1A logic pulser can be used to perform in-circuit testing of TTL, CMOS, and many other logic devices at a maximum of 50MHz. The GLP-1A is enhanced with a logic probe function with a minimum detectable pulse width of 10 ns, providing enough sensitivity for most applications. A Short 10 sec pulse width assures that no damage will occur to circuits whilst testing. With a weight less than 50g, a non-slip grip, and an external sync input, GLP-1A provides comfort and reliability for various troubleshooting tasks.
Combining a Logic Probe and Pulser Combined into One
Probe for Troubleshooting Digital Circuits
Operating Voltage: 4VDC ~ 18VDC
Maximum Input Signal Frequency: 50MHz
TTL: Logic “1”>3.0V±0.25V, Logic”0”<0.75±0.25V
CMOS: Logic “1”>60%VCC±5%, Logic”0”<15%VCC±5%
Minimum Detectable Pulse Width: 10nsec
Pulser: Sync input impedance 120kΩ
Pulse Repetition Rate: Switchable 0.5/400Hz
Pulse width: 10μsec
Dimensions & Weight: 18(W)x210(H)x18(D)mm, Approx. 50g
| LOGIC PROBE | |
| Maximum Input Frequency | 50MHz |
| Input Impedance | 120kΩ |
| Operating Voltage | 4V DC (minimum) 18V DC (maximum) |
| TTL | Logic "1" (HI LED) >3.0V +0.25V |
| Logic "0" (LO LED) <0.75V +0.25V | |
| CMOS | Logic "1" (HI LED) >60%Vcc +5% |
| Logic "0" (LO LED) <15%Vcc +5%, <40% +5% (For 7 ~ 18Vcc) | |
| LOGIC PULSER | |
| Sync Input Impedance | 1MΩ |
| Pulse Rate | 0.5/400pps |
| Pulse Width | 10μS |
| Output Current | 100mA sink/source |
| Square Wave Output | 5mA sink/source |
| Operation Voltage | 5 ~ 15V DC |
| Output Protection | 20V DC (maximum 30 sec) |
| Input Protection | 120V DC (maximum 30 sec) |
| Measurement Point Protection | 35V DC (maximum 30 sec) |
| DIMENSIONS & WEIGHT | |
| 18(W) x 210(H) x 18(L) mm Approx. 50 g |
|
Do you have a Logic Probe and Pulser that needs to be calibrated?
We offer standard traceable calibration and ISO 17025 accredited calibration services.
Get your Logic Probe and Pulser calibrated today! Click Here!
There are currently no reviews for this product.
