Your Cart
(empty)
0
Tradeport Electronics
measurement is our business
Cart : (empty)

GW Instek GRS-6052A - 50MHz, 2 Channels, Real Time/Digital Storage Oscilloscope

50MHz, 2 Channels, Real Time/Digital Storage Oscilloscope

GW Instek

Rated 0 / 5 (0 reviews)

Category : Analog Oscilloscopes

by quote only add to cart

Documents:
Datasheet

Overview
Features
Specifications
Calibration
  • GRS-6052A: DC~50MHz, 100MSa/s, 2kW/CH x 2
  • 2 Channels, 4 Traces
  • Equivalent Time Sampling of 500MSa/s max.
  • Waveform SAVE / RECALL (M0~M9)
  • Pre-trigger Function 0 ~ 10 div.
  • ROLL Mode to 100s/div.
  • Max. Sweep Rate 10ns/div.
  • Cursor Readout Function: △V, △T, 1/△T
  • ALT-MAG Function (x5, x10, x20)
  • Panel Setting SAVE / RECALL 10 sets. (M0~M9)
  • GRS-6052A: DC~50MHz, 100MSa/s, 2kW/CH x 2
  • 2 Channels, 4 Traces
  • Equivalent Time Sampling of 500MSa/s max.
  • Waveform SAVE / RECALL (M0~M9)
  • Pre-trigger Function 0 ~ 10 div.
  • ROLL Mode to 100s/div.
  • Max. Sweep Rate 10ns/div.
  • Cursor Readout Function: △V, △T, 1/△T
  • ALT-MAG Function (x5, x10, x20)
  • Panel Setting SAVE / RECALL 10 sets. (M0~M9)
    SPECIFICATIONS


      CRT
Type
GRS-6052A: 6-inch CRT 150CTB31, 10kV
GRS-6032A: 6-inch CRT D14-363GY, 2kV
INTEN and FOCUS Front panel control
Illumination Front panel control
Z-axis Output Sensitivity: at least 5V (TTL)
Polarity: positive going input decrease intensity
Max.input voltage: 30V (DC+AC peak)
GRS-6052A: Input impedance: approx. 47kΩ
GRS-6032A: Input impedance: approx. 33kΩ

      VERTICAL SYSTEM

 Sensitivity and Accuracy 1mV ~ 2mV/DIV±5%, 5mV ~ 20V/DIV±3%, 14 calibrated steps in 1-2-5 sequence
Variable Continuously 2.5:1 ~ min. 50V/DIV
Bandwidth (-3dB) and Rise Time
   

Bandwidth(-3dB)

Rise Time
GRS-6052A

5mV ~ 20V/DIV

DC ~ 50MHz

Approx. 7nS

1mV ~ 2mV/DIV

DC ~ 7MHz

Approx. 50nS
GRS-6032A

5mV ~ 20V/DIV

DC ~ 30MHz

Approx. 11.7nS

1mV ~ 2mV/DIV

DC ~ 7MHz

Approx. 50nS
Vertical Mode CH1, CH2, DUAL(ALT or CHOP)
Chopper Frequency Approx. 250kHz
Sum or Difference CH1+CH2, CH1-CH2
Invert CH2
Input Impedance Approx. 1MΩ±2% // approx. 25pF
Input Coupling AC, DC, GND
Maximum Input Voltage 400V (DC + AC peak)

      HORIZONTAL SYSTEM

 Sweep Time 0.2µS/DIV ~ 0.5S/DIV, 20 steps selectable in 1-2-5 sequence
Variable Continuously 2.5:1 UP TO 1.25s/DIV (uncal.)
Accuracy ±3%, ±5% at x5, x10 MAG. ±8% at x20 MAG
Sweep Magnification x5, x10, x20
Max. Sweep Time GRS-6052A: 20nS/DIV (10nS/DIV are uncalibrated)
GRS-6032A: 50nS/DIV (10nS/DIV ~ 40nS/DIV are uncalibrated)
ALT-MAG Function YES
HOLD-OFF Time Variable

      TRIGGER SYSTEM

 Trigger Modes AUTO, NORM, TV
Trigger Source VERT, CH1, CH2, LINE, EXT
Trigger Coupling AC, HFR, LFR, TV-V(-), TV-H(-)
Trigger Slope + or   - polarity
ALT Trigger YES
Trigger Sensitivity
GRS-6052A
CH1,2
VERT -MODE
EXT
20Hz ~ 5MHz
0.5 DIV
2.0 DIV
200mV
5MHz ~ 40MHz
1.5 DIV
3.0 DIV
800mV
40MHz ~ 50MHz
2.0 DIV
3.5 DIV
1V
GRS-6032A
CH1,2
VERT -MODE
EXT
20Hz ~ 5MHz
0.5 DIV
2.0 DIV
200mV
5MHz ~ 40MHz
1.5 DIV
3.0 DIV
800mV
TV sync pulse more than 1 DIV (CH1, CH2, VERT-MODE) or 200mV(EXT)
External Trigger Input Input Impedance: Approx. 1MΩ // 25pF (AC coupling)
Max. input voltage: 400V (DC+AC peak) at 1kHz

      X-Y OPERATION

 Input X-axis:CH1 ; Y-axis:CH2
Sensitivity 1mV/DIV ~ 20V/DIV
Bandwidth X-axis: DC ~ 500kHz (-3dB)
Phase Difference 3º or less from DC to 50kHz

      DIGITAL STORAGE

 Acquisition Memory 8 bit ADC x 2
Maximum Sampling rate 500MS/s for Equivalent time sampling
100MS/s for normal sampling
Storage Bandwidth Single shot:DC~5MHz(-3dB)
Repetivivevent:
GRS-6052A: DC~50MHz ±5DIV
GRS-6032A: DC~30MHz ±5DIV
Dynamic Range ±5DIV
Memory Length Acquisition Memory: 2kW/CH*2, 1kW/CH(equivalent)
Save REF Memory: 1kW/CH*10 with back-up memory
Display memory: 1kW/CH*4 waveform (max.)
Sweep Time Equivalent: 0.2µs/DIV ; 0.5µs/DIV
Normal: 1µs/DIV~0.1s/DIV
ROLL:0.2s/DIV~100s/DIV
Sweep Magnification x5, x10, x20
Max. Sweep Time 10ns/DIV
MAG Interpolation  DOT, Linear
ALT-MAG Function  YES
Acquire Mode Sample, Peak Detect(>25ns), Envelop, Per-sist, Average(2~256)
Operation Mode  Auto, Norm, Single, Single-Roll, Roll, X-Y, Average(2~256), Run/Stop
Smoothing Function  Dot joint ON/OFF selectable
Pre-Trigger 0~10DIV in 0.02DIV steps
X-Y Operation  X-axis: CH1, Y-axis: CH2
Storage Bandwidth:
GOS-6052A: DC~50MHz(-3dB)
GOS-6032A: DC~30MHz(-3dB)
Display Resolution  H:100points/DIV ; V:25 points/DIV
X-Y: 25*25 points/DIV
Waveform SAVE/RECALL  10 sets (REF0~REF9)
      CURSOR READOUT  Cursor Measurement ΔV, ΔT, 1/ΔT
Readout Intensity Adjustable

      OUTPUT SIGNAL
CH1 Signal Output Voltage: approx. 20mV/DIV (with 50Ω terminated);
Bandwidth: 50Hz~5MHz
Calibrator Output Voltage: 0.5V ±3%
Frequency: approx. 1kHz,  Square wave
      INTERFACE RS-232C Interface
      POWER SOURCE AC 100V/120V/ 230V + 10%, 50/60Hz
      ACCESSORIES Power cord x 1, Instruction manual x 1, Probes(10:1/1:1) x 2
      DIMENSIONS & WEIGHT 275(W) x 130(H) x 370(D) mm, Approx. 7.2kg

 


Do you have a 50MHz, 2 Channels, Real Time/Digital Storage Oscilloscope that needs to be calibrated?

We offer standard traceable calibration and ISO 17025 accredited calibration services.

Get your 50MHz, 2 Channels, Real Time/Digital Storage Oscilloscope calibrated today! Click Here!

 

There are currently no reviews for this product.

 

Review the GW Instek GRS-6052A - 50MHz, 2 Channels, Real Time/Digital Storage Oscilloscope

50MHz, 2 Channels, Real Time/Digital Storage Oscilloscope

Name :

Email :

Title :

Review: