Your Cart

(empty)

0

DC Electronic Loads

1
2
3
4
5
6
...
11

APM EL600VDC600W - High-density Programmable DC Electronic Load (Professional)

This series high power density programmable DC electronic load provides three voltage ranges 200V/600V/1200V. Supports CV, CC, CR and CP these 4 basic operating modes, as well as CV+CC, CV+CR, CR+CC these 3 complex operating modes. Full protection includings OCP, OPP, OTP, over voltage and reverse alarm. Support external control and monitor mode, the 0 to 10V input or output signal represent 0 to full range voltage or current. Provide OCP test, OPP test and Short circuit simulation to effectively solve the application demands for power and automated testing. Built-in RS232, RS485 and USB communication interfaces, LAN&GPIB communication card is optional. Two or more loads can be connected in master-slave parallel mode to provide more power or current capacity. This series DC load can be applied to battery discharge, DC charging station and power electronics and other electronics products.

$3,235 (USD)

This series high power density programmable DC electronic load provides three voltage rang...

APM EL600VDC600W - High-density Programmable DC Electronic Load (Advanced)

This series high power density programmable DC electronic load provides three voltage ranges 200V/600V/1200V. Supports CV, CC, CR and CP these 4 basic operating modes, as well as CV+CC, CV+CR, CR+CC these 3 complex operating modes. Full protection includings OCP, OPP, OTP, over voltage and reverse alarm. Support external control and monitor mode, the 0 to 10V input or output signal represent 0 to full range voltage or current. Provide OCP test, OPP test and Short circuit simulation to effectively solve the application demands for power and automated testing. Built-in RS232, RS485 and USB communication interfaces, LAN&GPIB communication card is optional. Two or more loads can be connected in master-slave parallel mode to provide more power or current capacity. This series DC load can be applied to battery discharge, DC charging station and power electronics and other electronics products.

$2,830 (USD)

This series high power density programmable DC electronic load provides three voltage rang...

APM EL200VDC600W - High-density Programmable DC Electronic Load (Professional)

This series high power density programmable DC electronic load provides three voltage ranges 200V/600V/1200V. Supports CV, CC, CR and CP these 4 basic operating modes, as well as CV+CC, CV+CR, CR+CC these 3 complex operating modes. Full protection includings OCP, OPP, OTP, over voltage and reverse alarm. Support external control and monitor mode, the 0 to 10V input or output signal represent 0 to full range voltage or current. Provide OCP test, OPP test and Short circuit simulation to effectively solve the application demands for power and automated testing. Built-in RS232, RS485 and USB communication interfaces, LAN&GPIB communication card is optional. Two or more loads can be connected in master-slave parallel mode to provide more power or current capacity. This series DC load can be applied to battery discharge, DC charging station and power electronics and other electronics products.

$3,100 (USD)

This series high power density programmable DC electronic load provides three voltage rang...

APM EL200VDC600W - High-density Programmable DC Electronic Load (Advanced)

This series high power density programmable DC electronic load provides three voltage ranges 200V/600V/1200V. Supports CV, CC, CR and CP these 4 basic operating modes, as well as CV+CC, CV+CR, CR+CC these 3 complex operating modes. Full protection includings OCP, OPP, OTP, over voltage and reverse alarm. Support external control and monitor mode, the 0 to 10V input or output signal represent 0 to full range voltage or current. Provide OCP test, OPP test and Short circuit simulation to effectively solve the application demands for power and automated testing. Built-in RS232, RS485 and USB communication interfaces, LAN&GPIB communication card is optional. Two or more loads can be connected in master-slave parallel mode to provide more power or current capacity. This series DC load can be applied to battery discharge, DC charging station and power electronics and other electronics products.

$2,715 (USD)

This series high power density programmable DC electronic load provides three voltage rang...

GW Instek PEL-5024C-150-2000 - 150V, 2000A, 24kW High Power DC Electronic Load

GW Instek PEL-5000C series single-channel electronic load provides 150V/ 600V/ 1200V models with a power range of 6kW~24kW.

by quote only

GW Instek PEL-5000C series single-channel electronic load provides 150V/ 600V/ 1200V model...

GW Instek PEL-5024C-1200-960 - 1200V, 960A, 24kW High Power DC Electronic Load

GW Instek PEL-5000C series single-channel electronic load provides 150V/ 600V/ 1200V models with a power range of 6kW~24kW.

by quote only

GW Instek PEL-5000C series single-channel electronic load provides 150V/ 600V/ 1200V model...

GW Instek PEL-5020C-1200-800 - 1200V, 800A, 20kW High Power DC Electronic Load

GW Instek PEL-5000C series single-channel electronic load provides 150V/ 600V/ 1200V models with a power range of 6kW~24kW.

by quote only

GW Instek PEL-5000C series single-channel electronic load provides 150V/ 600V/ 1200V model...

GW Instek PEL-5018C-1200-720 - 1200V, 720A, 18kW High Power DC Electronic Load

GW Instek PEL-5000C series single-channel electronic load provides 150V/ 600V/ 1200V models with a power range of 6kW~24kW.

by quote only

GW Instek PEL-5000C series single-channel electronic load provides 150V/ 600V/ 1200V model...

GW Instek PEL-5015C-1200-600 - 1200V, 600A, 15kW High Power DC Electronic Load

GW Instek PEL-5000C series single-channel electronic load provides 150V/ 600V/ 1200V models with a power range of 6kW~24kW.

by quote only

GW Instek PEL-5000C series single-channel electronic load provides 150V/ 600V/ 1200V model...

GW Instek PEL-5012C-1200-480 - 1200V, 480A, 12kW High Power DC Electronic Load

GW Instek PEL-5000C series single-channel electronic load provides 150V/ 600V/ 1200V models with a power range of 6kW~24kW.

by quote only

GW Instek PEL-5000C series single-channel electronic load provides 150V/ 600V/ 1200V model...

1
2
3
4
5
6
...
11

Information
Calibration Network
- Log In
- Jobs
- Tasks
- Instruments
- Settings
- Logout
Contacts
- Telephone
  1-800-379-4620 (905) 660-3797
- Fax
  (905) 660-3019
Stay Informed
- Social Media
- Signup for our Newsletter!
- go