Your Cart
(empty)
0
Tradeport Electronics
measurement is our business
Cart : (empty)

EMI / EMC Test Instrumentation


NoiseKen 01-00042A - PROBE FOR /07

PROBE FOR EPS-3000/3007 (PROBE C)

by quote only

PROBE FOR EPS-3000/3007 (PROBE C)...

View Product

NoiseKen 01-NHC010 - CIRCULAR PROBE

CIRCULAR PROBE FOR VERTICAL MAGNETIC FIELD DETECTION (FOR EPS-6000-3G) 1MM, 150kHz-3GHz

by quote only

CIRCULAR PROBE FOR VERTICAL MAGNETIC FIELD DETECTION (FOR EPS-6000-3G) 1MM, 150kHz-3GHz...

View Product

NoiseKen EPS-3007 - EPS-07 - Emission Measurement Equipment (EPS)

EMISSION MEASUREMENT SYSTEM FOR PCB 1.5 GHz

by quote only

EMISSION MEASUREMENT SYSTEM FOR PCB 1.5 GHz...

View Product

NoiseKen EPS-3007-PCIE - EPS-07-P -Emission Measurement Equipment (EPS)

EMISSION MEASUREMENT SYSTEM FOR PCB - PCI-e BOARD SET (CR-ROM & BOARD)

by quote only

EMISSION MEASUREMENT SYSTEM FOR PCB - PCI-e BOARD SET (CR-ROM & BOARD)...

View Product

NoiseKen ZAP-1A - Z-axis ESD test system

NoiseKen ZAP-1A: ZAP-1A is highly repeatable Z-axis ESD test system, capable of applying air discharge with the speed of 5mm/s. ESD pulse is applied to EUT at a constant speed. It eliminates the differences of test results between operations. Residual voltage on surface of EUT can be eliminated with eliminator option automatically.

by quote only

NoiseKen ZAP-1A: ZAP-1A is highly repeatable Z-axis ESD test system, capable of applying a...

View Product

NoiseKen EV-103 - Electrostatic Voltmeter

NoiseKen EV-103: 3-mode measurement ( Normal mode (instantaneous value) / Peak value hold mode / AC potential mode) - High sensitivity and accuracy (3 1/2 digit indication, 10V resolution) - Easy adjustment of measuring distance (Measuring position and distance can be set by red LED light, assuring high reliability measurement.) - Compact and light weight (Portable size equivalent to telephone card) - Output terminal provided (Connectable to a recorder etc.)

by quote only

NoiseKen EV-103: 3-mode measurement ( Normal mode (instantaneous value) / Peak value hold ...

View Product

NoiseKen EPS-3000 - Emission Measurement Equipment

NoiseKen EPS-3000: The EMC PRECISION SCAN is a scanner system to measure RF near-field emissions from a printed circuit board under test in normal offices or similar electromagnetic environments by utilizing an X-Y axis antenna probe scanning mechanism. The scanning results are represented on the user''s PC monitor as frequency spectrum charts and field intensity distribution color maps, the latter of which is superimposed on the actual board image captured by the CCD camera mounted on the scanner main unit, allowing the user to easily locate the exact sources of emission.

by quote only

NoiseKen EPS-3000: The EMC PRECISION SCAN is a scanner system to measure RF near-field emi...

View Product

NoiseKen SWCS-932/S4 - Damped-Oscillatory Wave Simulator

NoiseKen SWCS-932/S4: The Model: SWCS-932/S4 is intended to test damped oscillatory waves for surge immunity in a system including a static relay conforming to ANSI/IEEE C37.90.1.1989.

by quote only

NoiseKen SWCS-932/S4: The Model: SWCS-932/S4 is intended to test damped oscillatory waves ...

View Product

NoiseKen VDS-220B - Voltage Dip Simulator

NoiseKen VDS-220B: Electromagnetic noise is a well known cause of malfunction in digital equipment. In addition, momentary power failure (blackout) and power supply voltage fluctuation (brownout) also cause equipment malfunction. If the power supply voltage drops below the prescribed value for more than a few tens of milliseconds, an electronic device can hardly operate normally. When momentary power failure or voltage drop occurs in the power-transmission line, it usually takes about 0.07 second at the soonest before recovery. This 0.07 second of power failure or voltage drop is time enough to affect computer systems. Such power failures and voltage fluctuations are brought about by various causes (e.g. lightning strikes, accidents involving power lines, and the lack of proper maintenance of adjacent equipment.) Entirely preventing these various causes is impossible. With this in mind, the importance of testing electronic devices for susceptibility to momentary power failure and voltage drop is ever-increasing. Our VDS series is valuable as an evaluation device corresponding to present-day conditions.

by quote only

NoiseKen VDS-220B: Electromagnetic noise is a well known cause of malfunction in digital e...

View Product

NoiseKen VDS-2002 - Voltage Dip and Up Simulator

Fully compliant with all the test generator requirements of IEC standard. # One unit solution for dip, swell, interruption and variation tests up to 16A 290V single phase AC Interrupiton test up to 16A 125V DC (*) Two motor-driven transformers approach enables switching between any voltages (*) # Preset IEC test levels 0%/40%/70%/ additional 120% Two modes for 0% (interruption) test: open & short (*) Optional Windows application software available for more extensively control the unit Accurate waveforms (*)Optional software required

by quote only

Fully compliant with all the test generator requirements of IEC standard. # One unit solu...

View Product