Your Cart
(empty)
0
Tradeport Electronics
measurement is our business
Cart : (empty)

GW Instek GPT-12002 - AC 200VA AC/DC Withstanding Voltage Electrical Safety Analyzer

GW Instek introduces the flagship model (200VA output capacity) safety analyzer-the GPT-12000 series, which is the first safety analyzer in the world to comply with IEC 61010-2-034 (Safety requirement for electrical requirement for measurement, control and laboratory use – particular requirements for measurement equipment for insulation resistance and test equipment for electric strength), which stipulates that the requirements of the software and hardware interfaces must be followed while designing high voltage and insulation resistance test and measurement instruments so as to ensure that users are provided with necessary protection and warning while using the instruments.

by quote only

GW Instek introduces the flagship model (200VA output capacity) safety analyzer-the GPT-12...

View Product

GW Instek GPT-12003 - AC 200VA AC/DC/IR Electrical Safety Analyzer

GW Instek introduces the flagship model (200VA output capacity) safety analyzer-the GPT-12000 series, which is the first safety analyzer in the world to comply with IEC 61010-2-034 (Safety requirement for electrical requirement for measurement, control and laboratory use – particular requirements for measurement equipment for insulation resistance and test equipment for electric strength), which stipulates that the requirements of the software and hardware interfaces must be followed while designing high voltage and insulation resistance test and measurement instruments so as to ensure that users are provided with necessary protection and warning while using the instruments.

by quote only

GW Instek introduces the flagship model (200VA output capacity) safety analyzer-the GPT-12...

View Product

GW Instek GPT-12004 - AC 200VA AC/DC/IR/GB Electrical Safety Analyzer

GW Instek introduces the flagship model (200VA output capacity) safety analyzer-the GPT-12000 series, which is the first safety analyzer in the world to comply with IEC 61010-2-034 (Safety requirement for electrical requirement for measurement, control and laboratory use – particular requirements for measurement equipment for insulation resistance and test equipment for electric strength), which stipulates that the requirements of the software and hardware interfaces must be followed while designing high voltage and insulation resistance test and measurement instruments so as to ensure that users are provided with necessary protection and warning while using the instruments.

by quote only

GW Instek introduces the flagship model (200VA output capacity) safety analyzer-the GPT-12...

View Product

GW Instek LCR-8205 - DC, 10Hz ~ 5MHz High-Frequency LCR Meter

GW Instek launches a new series of high-frequency LCR meter ~ LCR-8200, which has four models and the maximum test frequency is up to 30MHz. The entire series adopts 7-inch color display and features a high measurement accuracy (0.08%). The measurement results can be presented numerically or graphically according to the selected measurement mode, allowing users to optimally interpret the characteristics of the DUT. At the same time, a full range of standard interfaces such as USB device / RS-232C / Handler and GPIB allow users to control the instrument by the most familiar interface without worrying about additional hardware investment costs. Furthermore, the series also provides USB storage function when operating in the graphics mode. The measured characteristic curves and values of the DUT are saved for subsequent analysis. The wide variety of features of the LCR-8200 can help users easily respond to the test requirements of passive components in R&D, engineering, and production.

by quote only

GW Instek launches a new series of high-frequency LCR meter ~ LCR-8200, which has four mod...

View Product

GW Instek LCR-8210 - DC, 10Hz ~ 10MHz High-Frequency LCR Meter

GW Instek launches a new series of high-frequency LCR meter ~ LCR-8200, which has four models and the maximum test frequency is up to 30MHz. The entire series adopts 7-inch color display and features a high measurement accuracy (0.08%). The measurement results can be presented numerically or graphically according to the selected measurement mode, allowing users to optimally interpret the characteristics of the DUT. At the same time, a full range of standard interfaces such as USB device / RS-232C / Handler and GPIB allow users to control the instrument by the most familiar interface without worrying about additional hardware investment costs. Furthermore, the series also provides USB storage function when operating in the graphics mode. The measured characteristic curves and values of the DUT are saved for subsequent analysis. The wide variety of features of the LCR-8200 can help users easily respond to the test requirements of passive components in R&D, engineering, and production.

by quote only

GW Instek launches a new series of high-frequency LCR meter ~ LCR-8200, which has four mod...

View Product

GW Instek LCR-8220 - DC, 10Hz ~ 20MHz High-Frequency LCR Meter

GW Instek launches a new series of high-frequency LCR meter ~ LCR-8200, which has four models and the maximum test frequency is up to 30MHz. The entire series adopts 7-inch color display and features a high measurement accuracy (0.08%). The measurement results can be presented numerically or graphically according to the selected measurement mode, allowing users to optimally interpret the characteristics of the DUT. At the same time, a full range of standard interfaces such as USB device / RS-232C / Handler and GPIB allow users to control the instrument by the most familiar interface without worrying about additional hardware investment costs. Furthermore, the series also provides USB storage function when operating in the graphics mode. The measured characteristic curves and values of the DUT are saved for subsequent analysis. The wide variety of features of the LCR-8200 can help users easily respond to the test requirements of passive components in R&D, engineering, and production.

by quote only

GW Instek launches a new series of high-frequency LCR meter ~ LCR-8200, which has four mod...

View Product

GW Instek LCR-8230 - DC, 10Hz ~ 30MHz High-Frequency LCR Meter

GW Instek launches a new series of high-frequency LCR meter ~ LCR-8200, which has four models and the maximum test frequency is up to 30MHz. The entire series adopts 7-inch color display and features a high measurement accuracy (0.08%). The measurement results can be presented numerically or graphically according to the selected measurement mode, allowing users to optimally interpret the characteristics of the DUT. At the same time, a full range of standard interfaces such as USB device / RS-232C / Handler and GPIB allow users to control the instrument by the most familiar interface without worrying about additional hardware investment costs. Furthermore, the series also provides USB storage function when operating in the graphics mode. The measured characteristic curves and values of the DUT are saved for subsequent analysis. The wide variety of features of the LCR-8200 can help users easily respond to the test requirements of passive components in R&D, engineering, and production.

by quote only

GW Instek launches a new series of high-frequency LCR meter ~ LCR-8200, which has four mod...

View Product

GW Instek GSP-818 - 1.8GHz

GSP-818 is a new general spectrum analyzer, which supports a frequency range of 1.8 GHz and provides testing requirements for RF products during the development/production phases. GSP-818 has a built-in 20dB amplifier and provides an adjustable range of resolution bandwidth (RBW) from 10Hz to 3MHz. In addition, it has the AM/FM signal demodulation function and the ACPR/OCBW/CHPW test functions to meet the requirements of general RF signal measurement.

by quote only

GSP-818 is a new general spectrum analyzer, which supports a frequency range of 1.8 GHz an...

View Product

APM AT-T2000 - Switching Power Supply Test System

Application to Various switching power supply, adapter, charger, LED power supply, communication power supply, PC power supply, PCBA and finished product testing.

by quote only

Application to Various switching power supply, adapter, charger, LED power supply, communi...

View Product

APM AT-T1000 - AT-T1000 Series Inverter Test System

Applicable to Research and development , factory inspection, type test, production commissioning, laboratory electrical test, identification and testing and other fields of grid-connected inverter.

by quote only

Applicable to Research and development , factory inspection, type test, production commiss...

View Product