Your Cart
(empty)
0
Tradeport Electronics
measurement is our business
Cart : (empty)

GW Instek GFC-8010H - 120MHz Intelligent Counter

The GFC-8010H performs virtually most of the counting measurements required in laboratories, in terms of both period and frequency. 8 digits LED display with distinctive red color and overflow indicator provides fast and clear view. With easy operation of all functions neatly organized on the front panel, compact size suitable for both portable and bench-top usage, the GFC-8010H serves users as a handy reference.

by quote only

The GFC-8010H performs virtually most of the counting measurements required in laboratorie...

View Product

GW Instek GFC-8131H - 1.3GHz Intelligent Counter

The GFC-8000 Series performs virtually all of the counting measurements required in laboratories, in terms of both period and frequency. A bright red 8 digit LED display with an included overflow indicator provides a clear view. Both models feature a stable time base with a maximum resolution of 100nHz and 10nS at 1Hz for frequency and period measurement, respectively. Gate time can be configured for fast response (5 digits/10ms) or accuracy (7 digits/s) for more control. For high frequency needs, the GFC-8270H can operate at up to 2.7GHz. The GFC-8000 Series features easy operation with a simple front panel interface, suitable for both portable and bench-top use.

by quote only

The GFC-8000 Series performs virtually all of the counting measurements required in labora...

View Product

GW Instek GOM-801H - High Precision Programmable DC Milli-Ohm Meter

3 1/2 digits D.C. Milli-ohm Meter. The GOM-801H milliohm meter is the ideal device for quick and precise component and material resistance measurements. The main display is equipped with a 3 1/2 digit 0.5" red LED with comparator indicators. Measurable objects can cover cable joints, earth bonds, switches, motors, transformers and generators. The front panel features seven selectable test ranges, 20mΩ to 20kΩ. The internal comparator is fully adjustable for the user settable Hi/Lo comparison indicator. The GOM-801H is the best choice for an inexpensive, easy to use, yet reliable milliohm meter.

by quote only

3 1/2 digits D.C. Milli-ohm Meter. The GOM-801H milliohm meter is the ideal device for ...

View Product

GW Instek LCR-816 - 2kHz High Precision LCR Meter

Instek LCR-816: Test Frequency: 100Hz~2kHz, Continuously Variable Frequencies - 0.1% Measurement Accuracy - 100 Sets Memory for Save/Recall of Setup State - R/Q, C/D, C/R, L/Q Test Modes - Absolute Value, Delta Value, and Delta % Measurement Display - 240 x 128 dot Matrix LCD Display - Test Condition and Test Result Shown on the Screen Simultaneously - Option: RS-232C (Including LCR-Viewer Software)

by quote only

Instek LCR-816: Test Frequency: 100Hz~2kHz, Continuously Variable Frequencies - 0.1% Measu...

View Product

NoiseKen ZAP-1A - Z-axis ESD test system

NoiseKen ZAP-1A: ZAP-1A is highly repeatable Z-axis ESD test system, capable of applying air discharge with the speed of 5mm/s. ESD pulse is applied to EUT at a constant speed. It eliminates the differences of test results between operations. Residual voltage on surface of EUT can be eliminated with eliminator option automatically.

by quote only

NoiseKen ZAP-1A: ZAP-1A is highly repeatable Z-axis ESD test system, capable of applying a...

View Product

Soken DAC-PD-7 - Partial Discharge Measuring Equipment.

Soken DAC-PD-7: DAC-PD-7 is designed to reduce complicated tasks (calibration, wiring, and evaluation) with Partial Discharge (PD) measurements so that they can test PD promptly and easily without expert knowledge. DAC-PD-7 alone allows all of the tests on PD without peripheral equipment. DAC-PD-7 can easily realize the test of PD on print-circuit boards, connectors, semiconductors, small motors, and other insulation materials, to make a judgment on good or bad of them.

by quote only

Soken DAC-PD-7: DAC-PD-7 is designed to reduce complicated tasks (calibration, wiring, and...

View Product

Soken DAC-VD-1 - Vacuum Discharge Test Equipment

Soken DAC-VD-1: The test equipment enables specifying the defective points such as scratches or pinholes on stator coils of compressor motors and so on. Electric discharges of the defective points of a test specimen in the transparent acrylic vacuum chamber, that are too hard to be found with conventional methods, can be instantly located. When combined with other measuring instruments, DAC-VD-1 will be the test equipment used widely in variety of applications from product developments to outgoing inspections.

by quote only

Soken DAC-VD-1: The test equipment enables specifying the defective points such as scratch...

View Product

Vitrek 948i - High Voltage Switching System

Vitrek 948i: When a single 948i High Voltage Switching System is combined with an automated hipot tester, up to 48 test points can be scanned for high voltage isolation - multiple units make the scanning possibilities virtually unlimited. The 948i is fast and easy to use so there is no excuse for using the hit-and-miss manual probing method of high voltage testing. The 948i reduces operator exposure to high test voltages while enhancing product quality and reliability. Consistent and repeatable test results are automatically documented making it simple to prove compliance with ISO 9000 quality standards.

by quote only

Vitrek 948i: When a single 948i High Voltage Switching System is combined with an automate...

View Product

Vitrek 930i - Ground Integrity Analyzer

Vitrek 930i: At Vitrek we believe that your investment in safety compliance test equipment is an extremely important one. We realize that today's test professional is constantly faced with changing test requirements and that is why we build versatility into each test instrument we manufacture. The 930i Ground Integrity Analyzer is a case in point - the output current is fully user selectable from 3 to 30 amperes. So whether you're testing to a UL specification at 25 amps today or an IEC specification at 30 amps tomorrow, you can be sure that the Vitrek 930i will stand up to the test for years to come

by quote only

Vitrek 930i: At Vitrek we believe that your investment in safety compliance test equipment...

View Product

Vitrek 944i - Dielectric Tester

Vitrek 944i: If you need one unit that does the work of a multitude of test instruments, consider the speed, power and flexibility of the Vitrek 944i. The Vitrek 944i combines AC dielectric strength testing (AC Hipot) with DC dielectric strength testing (DC Hipot), insulation resistance (to 65 Gigohms) and earth continuity measurement all in one feature-rich automated instrument. This compact dielectric analyzer lets you measure four electrical safety test parameters from a single test connection-all with the touch of a button.

by quote only

Vitrek 944i: If you need one unit that does the work of a multitude of test instruments, c...

View Product