Your Cart
(empty)
0
Tradeport Electronics
measurement is our business
Cart : (empty)

NoiseKen SWCS-932/S4 - Damped-Oscillatory Wave Simulator

NoiseKen SWCS-932/S4: The Model: SWCS-932/S4 is intended to test damped oscillatory waves for surge immunity in a system including a static relay conforming to ANSI/IEEE C37.90.1.1989.

by quote only

NoiseKen SWCS-932/S4: The Model: SWCS-932/S4 is intended to test damped oscillatory waves ...

View Product

NoiseKen VDS-220B - Voltage Dip Simulator

NoiseKen VDS-220B: Electromagnetic noise is a well known cause of malfunction in digital equipment. In addition, momentary power failure (blackout) and power supply voltage fluctuation (brownout) also cause equipment malfunction. If the power supply voltage drops below the prescribed value for more than a few tens of milliseconds, an electronic device can hardly operate normally. When momentary power failure or voltage drop occurs in the power-transmission line, it usually takes about 0.07 second at the soonest before recovery. This 0.07 second of power failure or voltage drop is time enough to affect computer systems. Such power failures and voltage fluctuations are brought about by various causes (e.g. lightning strikes, accidents involving power lines, and the lack of proper maintenance of adjacent equipment.) Entirely preventing these various causes is impossible. With this in mind, the importance of testing electronic devices for susceptibility to momentary power failure and voltage drop is ever-increasing. Our VDS series is valuable as an evaluation device corresponding to present-day conditions.

by quote only

NoiseKen VDS-220B: Electromagnetic noise is a well known cause of malfunction in digital e...

View Product

NoiseKen VDS-2002 - Voltage Dip and Up Simulator

Fully compliant with all the test generator requirements of IEC standard. # One unit solution for dip, swell, interruption and variation tests up to 16A 290V single phase AC Interrupiton test up to 16A 125V DC (*) Two motor-driven transformers approach enables switching between any voltages (*) # Preset IEC test levels 0%/40%/70%/ additional 120% Two modes for 0% (interruption) test: open & short (*) Optional Windows application software available for more extensively control the unit Accurate waveforms (*)Optional software required

by quote only

Fully compliant with all the test generator requirements of IEC standard. # One unit solu...

View Product

NoiseKen INS-4040 - Impulse Noise Simulator

0.01 ~ 4.00KV ±10% with 50 ohm load, 10V step, Sweep mode available Push button setting for all parameters Terminal block outlet panel Sweep operation for output voltage, phase angle and repetition cycle Up to 5 test settings stored in the momory Floating output Coupling mode selection by plugging the supplied coaxial connector to the selected port Easily changeable mercury relay # Built-in 50 ohm terminator Easily changeable outlet panels CE marked

by quote only

0.01 ~ 4.00KV ±10% with 50 ohm load, 10V step, Sweep mode available Push button settin...

View Product

NoiseKen INS-4020 - oiseKen Impulse Noise Simulator

Push button setting for all parameters Terminal block outlet panel Sweep operation for output voltage, phase angle and repetition cycle Up to 5 test settings stored in the momory Floating output Coupling mode selection by plugging the supplied coaxial connector to the selected port Easily changeable mercury relay # Built-in 50 ohm terminator Easily changeable outlet panels CE marked 0.01 ~ 2.00KV ±10% with 50 ohm load, 10V step, Sweep mode available

by quote only

Push button setting for all parameters Terminal block outlet panel Sweep operation for o...

View Product

NoiseKen INS-AX2-450 - INS-AX2-0 Impulse Noise Simulator

NoiseKen INS-AX2-450: The INS-AX2 series simulators are the advanced version of the conventional manually operated INS-4020/4040 simulators, maintaining the identical interference signal characteristics while offering a new level of ease of use.

by quote only

NoiseKen INS-AX2-450: The INS-AX2 series simulators are the advanced version of the conven...

View Product

NoiseKen INS-AX2-420 - Impulse Noise Simulator

NoiseKen INS-AX2-420: The INS-AX2 series simulators are the advanced version of the conventional manually operated INS-4020/4040 simulators, maintaining the identical interference signal characteristics while offering a new level of ease of use.

by quote only

NoiseKen INS-AX2-420: The INS-AX2 series simulators are the advanced version of the conven...

View Product

NoiseKen INS-AX2-250 - Impulse Noise Simulator

NoiseKen INS-AX2-250: The INS-AX2 series simulators are the advanced version of the conventional manually operated INS-4020/4040 simulators, maintaining the identical interference signal characteristics while offering a new level of ease of use.

by quote only

NoiseKen INS-AX2-250: The INS-AX2 series simulators are the advanced version of the conven...

View Product

NoiseKen INS-AX2-220 - Impulse Noise Simulator

NoiseKen INS-AX2-220: The INS-AX2 series simulators are the advanced version of the conventional manually operated INS-4020/4040 simulators, maintaining the identical interference signal characteristics while offering a new level of ease of use.

by quote only

NoiseKen INS-AX2-220: The INS-AX2 series simulators are the advanced version of the conven...

View Product

NoiseKen LSS-730K - Lightning Surge Simulator

Voltage surge test (1.2/50µs) and current surge test (8.2µs) specified under JEC-210 and 212 standard. (JEC: Japanese Electrotechnical Committe) High voltage surge test up to 20kV or 30kV and high current surge test up to 4000A or 6000A Built-in 2-state isolation transformers.

by quote only

Voltage surge test (1.2/50µs) and current surge test (8.2µs) specified under JEC-210...

View Product