Your Cart
(empty)
0
Tradeport Electronics
measurement is our business
Cart : (empty)

NoiseKen LSS-720C - Lightning Surge Simulator

Voltage surge test (1.2/50µs) and current surge test (8.2µs) specified under JEC-210 and 212 standard. (JEC: Japanese Electrotechnical Committe) High voltage surge test up to 20kV or 30kV and high current surge test up to 4000A or 6000A Built-in 2-state isolation transformers.

by quote only

Voltage surge test (1.2/50µs) and current surge test (8.2µs) specified under JEC-210...

View Product

NoiseKen LSS-720B - Lightning Surge Simulator

Voltage surge test (1.2/50µs) and current surge test (8.2µs) specified under JEC-210 and 212 standard. (JEC: Japanese Electrotechnical Committe) High voltage surge test up to 20kV or 30kV and high current surge test up to 4000A or 6000A Built-in 2-state isolation transformers.

by quote only

Voltage surge test (1.2/50µs) and current surge test (8.2µs) specified under JEC-210...

View Product

NoiseKen LSS-15AX C-3 - Lightning Surge Simulator

NoiseKen LSS-15AX C-3: The LSS-15AX series have been newly designed to completely satisfy and exceed the requirements in IEC 61000-4-5 standard. The simulators consist of a combination wave generator applying a 1.2/50 open-circuit voltage wave in a high impedance test piece and delivering an 8/20 short-circuit current wave in a low impedance test piece, CCITT telecom wave generator and associated coupling and decoupling circuits. (the contents depend on the model) With 15kV output capability, the simulators can also be use for evaluating the equipment under test in destructive mode testing.

by quote only

NoiseKen LSS-15AX C-3: The LSS-15AX series have been newly designed to completely satisfy ...

View Product

NoiseKen LSS-15AX A-1 - Lightning Surge Simulator

NoiseKen LSS-15AX A-1: The LSS-15AX series have been newly designed to completely satisfy and exceed the requirements in IEC 61000-4-5 standard. The simulators consist of a combination wave generator applying a 1.2/50 open-circuit voltage wave in a high impedance test piece and delivering an 8/20 short-circuit current wave in a low impedance test piece, CCITT telecom wave generator and associated coupling and decoupling circuits. (the contents depend on the model) With 15kV output capability, the simulators can also be use for evaluating the equipment under test in destructive mode testing.

by quote only

NoiseKen LSS-15AX A-1: The LSS-15AX series have been newly designed to completely satisfy ...

View Product

NoiseKen FNS-AXII B50 - Fast Transient Noise Simulator

NoiseKen FNS-AXII B50: FNS-AXII series EFT/B simulators generate the fast repetitive spikes called for in IEC61000-4-4 standard. The products feature a 5-inch display, ten-button keypad, memory card interface and 3 additional output modes. Two operation modes are provided: Manual and Program modes. The parameters for the IEC test levels are preset in Manual mode for instant use. In program mode, the simulators run programmed test the operator made on the built-in sequencer.

by quote only

NoiseKen FNS-AXII B50: FNS-AXII series EFT/B simulators generate the fast repetitive spike...

View Product

NoiseKen FNS-2002 - Fast Transient Burst Simulator

NoiseKen FNS-2002: The most basic of basics in EMC test strategies: only an extensive test program from development, qualification to field test can ensure that your products are immune from Electrical Fast Transient/Burst (EFT/B). This is especially true since EFT/B events exist everywhere. In fact, in the scheme of international compliance, the Electrical Fast Transient/Burst immunity test is a must for almost all products. The EFT/B, such as switching transients originating from inductive load interruption, relay contact bounce, etc, are one of the main causes of equipment malfunctions, because they can occur anywhere, interfering with circuits primarily via mains and interconnection cables. EFT is characterized by fast rise times and short duration of pulses. Also significant is the fact that EFT comes in bursts with repetition rates exceeding 100kHz. In the real world, an EFT event is a series of pulses with changing amplitudes and repetition rates. For test purpose, the IEC61000-4-4 standard defines an idealized FET/B. The FNS-2002, with its valuable features and capabilities, will serve as a critical tool for anyone who wants to build quality products or needs to the IEC standard.

by quote only

NoiseKen FNS-2002: The most basic of basics in EMC test strategies: only an extensive test...

View Product

NoiseKen ZAP-100 - Automated ESD Test System For Automotive Electronics

NoiseKen ZAP-100: A recently development in ESD testing is an automated ESD test system for automotive electronics specifically designed to apply ESD pulses to interface cables or connector pins under test. The standard system supports testing up to 100 pins (300 pins optional). The Electrostatic Discharge Simulator Model: ESS-2000 in conjunction with a 3-axis motor-driven mechanism automatically applies discharges to the user-selected target pins and performs ESD testing in fully automated manner for all of the three discharge methods; air discharge, contact discharge and flashover tests. This innovative system greatly contributes to time and labor savings in standardized ESD tests.

by quote only

NoiseKen ZAP-100: A recently development in ESD testing is an automated ESD test system fo...

View Product

NoiseKen ESS-606AM - M Electrostatic Discharge Simulator conforming to ANSI/EOS/ESD-S5.1-1993 and ANSI-ESD-S5.2-1994

NoiseKen ESS-606AM: ESS-606AM is an electrostatic discharge simulator to simulate a static discharge of up to 2.5kV which may be generated by an electrified human body using the capacitor method so that the resistance and susceptibility of digital IC devices may be exmamined. The ESS-606AM allows the users to conduct a static discharge test conforming to ANSI/EOS/ESD-S5.1-1993 and ANSI/ESD-S5.2-1994

by quote only

NoiseKen ESS-606AM: ESS-606AM is an electrostatic discharge simulator to simulate a static...

View Product

NoiseKen TC-815R - Discharge Gun for Electrostatic Discharge Simulator

NoiseKen TC-815R: A lightweight and versatile discharge gun standard-supplied with the both ESS series models.

by quote only

NoiseKen TC-815R: A lightweight and versatile discharge gun standard-supplied with the bot...

View Product

NoiseKen ESS-801GL - GL Complete Set of ESD Test Enviroment for IEC 60-4-2 (Floor-Standing type)

NoiseKen ESS-801GL: The Test Environment Model: ESS-801GL is testing equipment used for discharge immunity tests for floor-standing equipment in accordance with IEC 61000-4-2 standard.

by quote only

NoiseKen ESS-801GL: The Test Environment Model: ESS-801GL is testing equipment used for di...

View Product